The Marantz AMP 30 is a slimline six-channel power amplifier, made in Shirakawa, Japan. It was introduced with the AV 30 preamplifier processor and went on sale in January 2026 at USD 4,000, GBP 3,500 and EUR 4,000. In the Marantz range it sits below the 16-channel AMP 10 and the 12-channel AMP 20. Marantz pairs it with the AV 30, with Marantz AV receivers or with further AMP 30, AMP 20 or AMP 10 units for larger speaker layouts.
Key specs that matter
Rated output is 200 W per channel into 8 ohms (1 kHz, 0.05% THD, two channels driven) and 400 W into 4 ohms (1 kHz, 0.7% THD, two channels driven). With five channels driven into 8 ohms the rating remains 200 W (0.7% THD). In BTL mode a bridged pair gives 400 W into 8 ohms. Frequency response is 5 Hz - 70 kHz (±3 dB, 1 W, 8 ohms), signal-to-noise ratio is 110 dB (IHF-A) and voltage gain is 29 dB. Input sensitivity and impedance are 1.4 V / 47 kohms unbalanced and 2.8 V / 100 kohms balanced. Dimensions are 442 x 442 x 112 mm (W x D x H), and weight is 10.0 kg.
Engineering and use context
Each of the six channels uses a switching power amplifier module, and Marantz states that its frequency characteristics change little with speaker impedance. It is combined with a high-speed preamplifier circuit with HDAM and current feedback. MELF resistors and electrolytic capacitors chosen for audio use sit on the circuit boards, and the outputs are machined brass SPKT-1+ terminals.
All six channels have balanced XLR and unbalanced RCA inputs, with a selector switch choosing one of the two. Bi-amp and BTL modes are set per pair of channels without an extra cable from the preamplifier. Speaker impedance is 4 - 16 ohms in normal and bi-amp mode and 8 - 16 ohms in BTL mode.
On the metal front panel are the Marantz porthole level meter and sidelights. Power consumption is 300 W, 70 W with no signal in ECO mode and 0.2 W in standby, and auto power off is included. Marantz gives a 5-year warranty in the United States and Canada.
Pairing
The supplied AMP CONTROL cable links it to a Marantz AV preamplifier, and power and illumination then follow the processor over a ground-floating connection. A remote control cable is also in the box. For custom installation there are RS232, an IR flasher input, the Marantz Remote Bus and one DC trigger input and output.
Alternatives
The Marantz AMP 20 is the 12-channel power amplifier of the same series, listed at USD 6,000.