The A Three S200 is the stereo power amplifier of the Absolute line from Orpheus Lab, a Swiss company founded in 2001. Orpheus Lab products are designed and produced by Mectronic SA in Yvonand. The Absolute line also includes the A Zero PC CD player, the A Zero PS SACD player, the A Two 22 D discrete preamplifier and the A Four I200 integrated amplifier. According to Orpheus Lab, the S200 inherits the technology developed for the Opus II models of the Heritage line.
Key specs that matter
Nominal audio power is 200 W into 8 ohms in class AB. Instantaneous power peak (<200 ms) is 850 W, at a maximum of 56.7 V peak and 15 A peak. Inputs are XLR or RCA, with an input impedance of 94 kohms balanced and 47 kohms unbalanced and a maximum input level of 2 V RMS balanced and 1 V RMS unbalanced. Gain is 26 dB balanced and 32 dB unbalanced. Frequency range is 5 Hz - 24 kHz (+0 dB, -0.1 dB) and 0.7 Hz - 85 kHz (-3 dB). THD+N is 0.004% (-88 dB) at 200 W per channel into 8 ohms and 0.001% (-100 dB) unloaded, both at 1 kHz with a 20 Hz - 22 kHz analysis range. Dynamic range is above 114 dB balanced and above 112 dB unbalanced. Output impedance is 0.0 ohms and the damping factor is above 3000. Dimensions are 440 x 148 x 420 mm (W x H x D), and weight is 30 kg.
Engineering and use context
This is a real dual mono design. Each channel has a current amplification stage with six high-power MOSFETs, hand-matched per channel, and each MOSFET is governed by a bipolar control stage. Feedback is applied through a multi-point feedback topology.
Bias current is 125 mA, for a thermal idle power of 15 W per channel. At rest the amplifier stabilises at 15 degrees C above ambient temperature. Orpheus Lab says its polarisation circuit keeps the bias constant regardless of operating temperature and load type, through a low-impedance BJT component architecture.
Every channel is powered by its own 880 VA toroidal transformer with 48 mF of dedicated capacitance. Nominal line voltage is 100, 115 or 230 V AC (±10%), and maximum power consumption is 930 W. A grounding option on the unbalanced inputs either connects the signal ground to earth or lifts it.
Protection acts on overload above 9 A peak, equivalent to 320 W peak into 4 ohms, and on DC components on the outputs below 5 Hz. If the AC line drops or is interrupted, the amplifier switches to muting automatically.
Pairing
The matching preamplifier is the A Two 22 D. Balanced preamplifiers connect to the XLR inputs, single-ended ones to the higher-gain RCA inputs.
Alternatives
Apart from the S200, the Orpheus Lab catalogue lists no stereo power amplifier.