Hifiverse

Endstufen Stereo - Allnic Audio A-2000 mk3

Beschreibung, Bilder, technische Daten und Spezifikationen

Allnic Audio A-2000 mk3
Bildquelle - (c) Allnic Audio

The A-2000 mk3 is a push-pull stereo tube power amplifier from Allnic Audio and the third version of its A-2000 model. Compared with the original, it moves to the KT170 beam tetrode, uses modified transformers in a newly designed, vibration-resistant chassis and brings several smaller circuit changes. The amplifier works in Class AB with a solid-state rectified power supply. Its US price is USD 15,950.

Key specs that matter

Into 8 ohm at 1 kHz the A-2000 mk3 produces 120 W per channel with the output tubes in pentode connection and 60 W in triode. Voltage gain is 26 dB, and 1.3 V brings it to full rated output. Each channel accepts its signal through RCA or XLR, with an input impedance of 100 kOhm. Distortion is 0.17% at 1 kHz and 10 W, frequency response is flat between 20 Hz and 20 kHz, and the CCIR-weighted noise floor sits 80 dB below the reference at 1 kHz. The damping factor is 8. The chassis is 440 mm wide, 480 mm deep and 300 mm high, and the amplifier weighs 36 kg net, or 41 kg packed.

Engineering and use context

Two KT170 tubes per channel, four in total, do the output work. The first stage of each channel uses a 5654 pentode connected as a triode, and the maker lists the 6AK5, EF95 and E905F among its equivalents. Phase inversion and drive come from four 6S4 triodes (the 6S4A also fits), which Allnic prefers to the 12AU7 or 12BH7 because the 6S4 handles a heavier load and passes more current. A single button changes the output tubes between pentode and triode while music plays. Each channel has its own 96 mm output transformer wound on a core of permalloy, the nickel and iron alloy that Allnic uses across its products. The maker describes them as Full Engagement transformers, with four secondary windings that always stay fully connected so that no section remains idle and prone to parasitic oscillation. Plate voltage arrives only after warm-up, through a soft-start stage. In place of LED bias indicators, an analogue current meter monitors each pair of KT170 tubes, and every tube has its own bias adjustment point and 0.5 A fuse.

Pairing

A front-panel toggle chooses between the 4 ohm and 8 ohm taps, and 8 and 16 ohm taps can be ordered from the factory, so the amplifier adapts to most passive loudspeakers. The pentode mode leaves enough reserve for moderately sensitive floorstanding speakers, while triode mode makes more sense with efficient designs in smaller rooms. Allnic preamplifiers with balanced outputs connect directly to the XLR inputs.

Alternatives

The Allnic A-2000 25th Anniversary is the earlier stereo version of this amplifier, rated at 100 W in pentode mode.

Spezifikationen

  • Modellbezeichnung

    A-2000 mk3

  • Eingangsempfindlichkeit (mV)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    100 000

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    100 000

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Maximaler Strom (A)

    N/A

  • Ausgangsleistung (8Ω) (W)

    120 (Pentode), 60 (Triode)

  • Ausgangsleistung (4Ω) (W)

    N/A

  • Verstärkung (dBu)

    26

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Signal-Rausch-Abstand (dB)

    N/A

  • Klirrfaktor + Rauschen (0% Gegenkopplung) (%)

    N/A

  • Klirrfaktor + Rauschen (100% Gegenkopplung) (%)

    N/A

  • Maximale Leistungsaufnahme (W)

    N/A

  • Dämpfungsfaktor

    8

  • Abmessungen (mm)

    N/A

  • Gewicht (kg)

    N/A

  • Offizieller Link

Weitere Komponenten