Hifiverse

Endstufen Stereo - Audiolab 9000P

Beschreibung, Bilder, technische Daten und Spezifikationen

Audiolab 9000P
Bildquelle - (c) Audiolab

The 9000P is the dedicated stereo power amplifier of the Audiolab 9000 Series, developed as the system expansion for the 9000Q preamplifier. Audiolab announced the pair in November 2024, with sales from December of that year in black or silver. UK pricing was GBP 1,099 alone or GBP 2,499 together with the 9000Q. It is the first Audiolab pre and power combination since the 8300XP, with engineering led by Jan Ertner and industrial design by David McNeill.

Key specs that matter

Rated output is 2 x 100 W into 8 ohms and 2 x 160 W into 4 ohms (THD <1%). In bridged mono mode it gives 300 W into 8 ohms and 380 W into 4 ohms. Frequency response is 20 Hz - 20 kHz (±0.3 dB), THD is <0.002% (1 kHz) and S/N is >112 dB (A-weighted). Gain is 29 dB (RCA) and 23 dB (XLR), input sensitivity is 1 Vrms (RCA) and 2 Vrms (XLR), and input impedance is 10 kohms. Maximum output current is 15 A. Standby consumption is <0.5 W. Dimensions are 444 x 90 x 327 mm (W x H x D), and net weight is 9.2 kg.

Engineering and use context

This is a Class AB design with Audiolab's CFB (Complementary Feedback) topology, in which idle current is kept independent of the temperature of the output transistors. A custom-specified 320 VA toroidal transformer is followed by 4 x 15,000 µF reservoir capacitance, 60,000 µF in total. Per channel, the stereo rating matches that of the 9000A integrated amplifier.

On the rear panel are one unbalanced RCA input pair, one balanced XLR input pair, a 3.5 mm 12V trigger input and one pair of speaker outputs. A LINE/XLR button selects the input, and a STEREO/BRIDGE selector switches the amplifier into mono operation, where the left input is used. Bridged operation follows the 8300MB mono power amplifier. A thermal switch interrupts the AC supply after sustained gross overload, and the unit is protected against a short-circuited output. In protection mode the power LED flashes, and a press of the standby button restores operation. Auto standby is set to 20 minutes by default and can be changed to 1 hour or disabled. Versions are made for 220-240 V and 100-120 V mains, and a power cord comes in the box.

Pairing

The matching preamplifier is the 9000Q. Two 9000P units in bridge mode form a pair of monoblocks, and two units in stereo mode allow bi-amping. The XLR input accepts any source or preamplifier with balanced outputs.

Alternatives

The Audiolab 8300XP is the stereo power amplifier of the earlier 8300 Series.

Spezifikationen

  • Modellbezeichnung

    9000P

  • Eingangsempfindlichkeit (mV)

    1000 (RCA) + 2000 (XLR)

  • Eingangsimpedanz (symmetrisch) (Ω)

    10 000

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    10 000

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Maximaler Strom (A)

    N/A

  • Ausgangsleistung (8Ω) (W)

    100

  • Ausgangsleistung (4Ω) (W)

    160

  • Verstärkung (dBu)

    29

  • Untere Grenzfrequenz +/- 3dB (Hz)

    20

  • Obere Grenzfrequenz +/- 3dB (Hz)

    20 000

  • Signal-Rausch-Abstand (dB)

    > 112

  • Klirrfaktor + Rauschen (0% Gegenkopplung) (%)

    N/A

  • Klirrfaktor + Rauschen (100% Gegenkopplung) (%)

    < 0.002

  • Maximale Leistungsaufnahme (W)

    N/A

  • Dämpfungsfaktor

    N/A

  • Abmessungen (mm)

    444 x 90 x 327

  • Gewicht (kg)

    9.2

  • Offizieller Link