Hifiverse

Endstufen Mono - Pass Labs XS150

Beschreibung, Bilder, technische Daten und Spezifikationen

Pass Labs XS150
Bildquelle - (c) Pass Labs

The Xs 150 is a class A mono power amplifier from Pass Labs of Auburn, California, and the smaller of the two Xs series monoblocks below the Xs 300. Each channel is built as two chassis, an amplifier chassis and a separate power supply chassis linked by an umbilical cable with locking Neutrik Powercon connectors. The output stage descends from the Super-Symmetric circuit that Nelson Pass patented, and his notes on the design date from March 2012.

Key specs that matter

Rated output is 150 W into 8 ohms in class A, and gain is 26 dB. Each channel has 112 output devices. Inputs are XLR and RCA, with an input impedance of 200 kohms balanced and 100 kohms single-ended and an input capacitance of a few picofarads. Power consumption is 700 W. Each of the two chassis measures 19 x 21.5 x 11 in. (W x D x H), about 483 x 546 x 279 mm, and the two weigh 102 lb and 132 lb (46.3 kg and 59.9 kg).

Engineering and use context

Each half of the balanced output stage is a push-pull follower biased into single-ended class A by a constant current source placed in parallel, with an efficiency of about 33%. Pass Labs states that four of the six output banks remain in class A to the rated output into 8 ohms, while the other two supply additional current when necessary. Compared with the X and XA series, the constant current bias is ten times higher. The power supply chassis has a larger power transformer, paralleled fast/soft recovery rectifiers and double the storage capacitance, and it also holds the constant current sources that bias the output stage. It dissipates about half the energy and isolates radiated power supply noise from the amplifier.

In the voltage gain stage, cascoded NOS Toshiba JFETs serve as input devices, followed by NOS Toshiba MOSFETs. CLF (Cascode Local Feedback) controls linearity around a single stage. The front end has 100 kHz open loop bandwidth, there is about 10 dB of feedback around the output stage, and the circuit is DC coupled with no frequency compensation. A front panel meter reads the current draw of the output stage and rises when output current exceeds the class A bias. Both speaker outputs are live, so a separate white ground terminal is provided. The amplifier switches on from the standby switch on the power supply or from a positive voltage on the remote turn-on terminals.

Pairing

A pair of Xs 150 is required for stereo. A preamplifier with balanced XLR outputs uses the balanced input, and the RCA input needs the gold input jumper on the XLR socket.

Alternatives

The Xs 300 is the higher-powered class A monoblock in the Pass Labs Xs series.

Spezifikationen

  • Modellbezeichnung

    XS150

  • Eingangsempfindlichkeit (mV)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Maximaler Strom (A)

    N/A

  • Ausgangsleistung (8Ω) (W)

    150

  • Ausgangsleistung (4Ω) (W)

    N/A

  • Verstärkung (dBu)

    26

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Signal-Rausch-Abstand (dB)

    N/A

  • Klirrfaktor + Rauschen (0% Gegenkopplung) (%)

    N/A

  • Klirrfaktor + Rauschen (100% Gegenkopplung) (%)

    N/A

  • Maximale Leistungsaufnahme (W)

    N/A

  • Dämpfungsfaktor

    N/A

  • Abmessungen (mm)

    190 x 215 x 110

  • Gewicht (kg)

    102

  • Offizieller Link

Weitere Komponenten