The PWR-222 is a mono power amplifier made in Denmark by Gato Audio of Herlev. Gato calls it a TwinFET power amplifier. A stereo system uses a pair, and each PWR-222 comes with a mains cable, a mini jack link cable and the manual, plus one mini jack Y-splitter cable per pair.
Key specs that matter
Output power (230 VAC) is 1 x 250 W RMS into 8 ohms and 1 x 450 W RMS into 4 ohms. Frequency response is 20 Hz - 20 kHz (-0.1 dB) and 2 Hz - 100 kHz (-3 dB). Total harmonic distortion is below 0.003% and signal-to-noise ratio exceeds 115 dB. Input impedance is 100 kohms on RCA and on the balanced input, and voltage gain is 26 dB. Recommended speaker load is 4 - 16 ohms, with load protection below 1.5 ohms. Connectors are one gold-plated Neutrik XLR, one gold-plated RCA, one pair of WBT NextGen speaker terminals and a 12 V trigger mini jack. Power consumption is below 1 W in standby, 55 W at idle and 800 W maximum. Dimensions are 325 x 105 x 400 mm (W x H x D), and weight is 16 kg.
Engineering and use context
A bipolar input stage leads the circuit, and the critical driver circuit has a separate power supply. The output stage uses a single set of high-power MOSFET output devices, one transistor for each positive and negative period, and Gato rates them for current levels of more than 400 amperes. According to Gato, most components work at 30% of their maximum workload capacity in normal use.
A microprocessor monitors heat, current and DC in the output stage and shuts the amplifier down when the accepted values are exceeded. Temperature, clipping and DC, and short circuit each have their own warning indication. The central analogue display shows output power as a VU meter, reads out the core temperature, or can be dimmed. A switch next to the input connectors selects the RCA or XLR input, and the 12 V trigger puts the PWR-222 into standby in sync with a preamplifier or integrated amplifier.
The top cover is available in real wood veneer or a painted finish, offered as high-gloss black, white or walnut.
Pairing
A loudspeaker within Gato's recommended load range is required. Balanced XLR or RCA outputs on the preamplifier both connect.
Alternatives
Gato Audio offers no other mono power amplifier.