Hifiverse

Endstufen Mono - Buckeye Amps PURIFI 1ET6525SA

Beschreibung, Bilder, technische Daten und Spezifikationen

Buckeye Amps PURIFI 1ET6525SA
Bildquelle - (c) Buckeye Amps

The PURIFI 1ET6525SA Monoblock is a single-channel class D power amplifier from Buckeye Amps, a US company that assembles and tests each amplifier individually. Inside is one Purifi 1ET6525SA module, the successor to the 1ET400A. It brings 2nd generation Eigentakt advancements from the larger 1ET9040BA and, against the 1ET400A, has lower output noise, higher SNR, lower distortion and more power. The monoblock costs USD 925, is built to order in three to four weeks and has a three-year warranty.

Key specs that matter

Output power is 230 W into 8 ohms, 450 W into 4 ohms and 510 W into 2 ohms (1 kHz, 1% THD). S/N is 137 dB and frequency response is 0 - 80 kHz. THD is 0.0001% (100 W, 4 ohms, 20 Hz - 20 kHz). Gain is switchable - 25 dB (High), 20 dB (Medium) or 15 dB (Low), with an input of 2.2, 3.9 or 6.9 V RMS for full output into 4 ohms and 2.3, 4.0 or 7.1 V RMS into 8 ohms. Input impedance is 10 kohms. The case measures 254 x 89 x 330 mm (W x H x D) and weighs 3.2 kg.

Engineering and use context

Power comes from a Hypex SMPS1200A400 switch-mode supply. Buckeye quotes 94% efficiency, 25 A output current and a high damping factor. Ahead of the Purifi module sits Buckeye's custom I/O board, with a TI OPA1612 op amp and TI TPS7A30 and TPS7A49 voltage regulators. It also carries the Low, Medium and High gain settings.

Switch-on and switch-off are muted with a soft start. Automatic signal sensing turns the amplifier on and off, and a 12 V trigger input is the alternative. Clipping and error conditions are shown by the front power LED. Its all-aluminium case has a black powder coat finish and is manufactured in North America by Protocase. Other case styles and colours are available as upgrades.

Pairing

A preamplifier or DAC with XLR outputs is the direct match for the Neutrik XLR input, and sources with RCA outputs connect through RCA to XLR cables. The High gain setting matches the input gain of Hypex amplifiers. Loudspeakers connect to gold-plated 5-way binding posts.

Alternatives

The Buckeye PURIFI 1ET9040BA Monoblock is the other Purifi-based mono power amplifier in the range, built on the larger 1ET9040BA module.

Spezifikationen

  • Modellbezeichnung

    PURIFI 1ET6525SA

  • Eingangsempfindlichkeit (mV)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Maximaler Strom (A)

    N/A

  • Ausgangsleistung (8Ω) (W)

    230

  • Ausgangsleistung (4Ω) (W)

    450

  • Verstärkung (dBu)

    25

  • Untere Grenzfrequenz +/- 3dB (Hz)

    0

  • Obere Grenzfrequenz +/- 3dB (Hz)

    80 000

  • Signal-Rausch-Abstand (dB)

    137

  • Klirrfaktor + Rauschen (0% Gegenkopplung) (%)

    N/A

  • Klirrfaktor + Rauschen (100% Gegenkopplung) (%)

    0.0001

  • Maximale Leistungsaufnahme (W)

    N/A

  • Dämpfungsfaktor

    N/A

  • Abmessungen (mm)

    254 × 330,2 × 88,9

  • Gewicht (kg)

    3,1

  • Offizieller Link