The Kassai is a mono power amplifier from Audio Note (UK), a pure class A, parallel single-ended tube design with a pair of 300B triodes per channel. It meets all of Audio Note's Level 4 criteria - pure class A operation, zero negative feedback, a single-ended output stage, tube rectification, directly heated triode operation, and materials and component quality. Three versions are offered - Kassai, Kassai Low Gain and Kassai Balanced. Each unit is built to order, with a lead time of about 8 weeks.
Key specs that matter
Maximum output is 18 W RMS into 4 or 8 ohm loads. Input impedance is 100 kOhm, or 600 ohms on the Balanced version. Input sensitivity is 250 mV for the standard version, 3.15 V for the Low Gain and 1.6 V for the Balanced. Channel balance is ±0.3 dB. Tube complement is one 6SN7, two 300B and one 5U4GB per chassis. Each amplifier weighs 20 kg and measures 195 x 205 x 506 mm (H x W x D). Mains input is AC 100-120 V or 220-240 V, 50/60 Hz, and maximum power consumption is 200 W.
Engineering and use context
In each chassis the 6SN7 is the input stage tube, the 300B pair forms the output stage and a selected 5U4GB provides tube rectification. Every amplifier is hand-assembled. Its custom output transformers combine copper primary windings with Audio Note silver secondary windings on UHiB double C cores, designed and manufactured in house in the UK. The parts list also includes Audio Note custom 1 W tantalum resistors, Audio Note copper foil capacitors, silver internal wiring and Kaisei electrolytic capacitors in critical areas.
On the Kassai Balanced the XLR input transformers are hand-wound by Audio Note with a copper primary and a silver secondary. The standard version has a single RCA input. Three binding posts, marked 0, 4 Ohm and 8 Ohm, are on the rear panel, next to an IEC 320 mains inlet and a rocker power switch.
The amplifiers are shipped without their tubes installed, and the tubes are installed by the owner or a specialist before first use. Audio Note quotes about 6000 hours of tube life and specifies replacement with matched tubes. At least 50 cm of free space is required above each amplifier for ventilation. The fascia is anodised aluminium or black acrylic, and the top plate is anodised aluminium or black anodised aluminium.
Pairing
A high-sensitivity loudspeaker is required. The Low Gain version matches preamplifiers with a high output level, and the Balanced version requires a preamplifier with XLR outputs.
Alternatives
The Conquest is a lower Level 3 mono power amplifier from Audio Note, also parallel single-ended with two 300B tubes per channel.