Hifiverse

Endstufen Mono - Aries Cerat lanus Geminae

Beschreibung, Bilder, technische Daten und Spezifikationen

Aries Cerat lanus Geminae
Bildquelle - (c) Aries Cerat

The Ianus Geminae is the flagship mono power amplifier of Aries Cerat and the first amplifier of the company's Ianus Series. Each monoblock occupies two chassis. Launched in 2020, it was priced at EUR 110,000, with UK and US prices of GBP 110,000 and USD 170,000.

Key specs that matter

Power output is 130 W into 8 ohms and 260 W into 4 ohms in class A, with stable operation down to 1 ohm. Gain is 32 dB, switchable to 28, 24, 20, 16 or 12 dB by the TVC system. Signal-to-noise ratio is 100 dB (ref. 0 dB) and damping factor is 200. Full power bandwidth is 10 Hz - 60 kHz, with the upper range limited by oscillation prevention limiters. Idle current is 12 A and user adjustable, and idle power consumption is 380 - 600 W per channel, depending on the bias setting. Maximum dimensions excluding the plinth are 720 x 400 x 610 mm (H x W x D), and each monoblock weighs 165 kg unpacked.

Engineering and use context

Its output stage is an output transformerless (OTL) floating circlotron with TriodeFet devices, a topology Aries Cerat calls a Super-Symmetric Self-Balancing inductively driven Circlotron. The active elements never go into cutoff, even at full power into 4 ohms. No feedback loops are used, local or global. Being self-centering, the floating circlotron needs no DC servos, no constant bias adjustment and no DC offset correction. AC coupling uses custom capacitors with an ESR below 2 milliohms, rated for surges up to 30,000 A.

A transformer-coupled small SET stage with an E280F tube forms the input stage, loaded by a transformer with geometrically and electrically balanced windings. It has its own tube-rectified, double choke-filtered supplies and a low noise negative bias system, and it drives the TriodeFet stage through floating secondaries of the coupling transformer. A bias monitor system covers all TriodeFet parameters and allows real-time adjustment of both stages. Instead of an output relay, protection circuits sense over current in the output stage and put the amplifier on stand-by. In the power supply, a pair of 800 VA power transformers supplies double pi-filter banks with large-core chokes and high speed capacitors. Aries Cerat quotes an output impedance 100 times lower than that of a single-ended design.

Pairing

A preamplifier or line-level source is required, and the variable gain TVC inputs set the level. Low-impedance loudspeakers are within its rated stability.

Alternatives

The Ianus QuintEssence is the smaller Aries Cerat mono power amplifier, a single stage, single-ended TriodeFet design rated at 65 W into 8 ohms.

Spezifikationen

  • Modellbezeichnung

    lanus Geminae

  • Eingangsempfindlichkeit (mV)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Maximaler Strom (A)

    N/A

  • Ausgangsleistung (8Ω) (W)

    130

  • Ausgangsleistung (4Ω) (W)

    260

  • Verstärkung (dBu)

    32

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Signal-Rausch-Abstand (dB)

    100

  • Klirrfaktor + Rauschen (0% Gegenkopplung) (%)

    N/A

  • Klirrfaktor + Rauschen (100% Gegenkopplung) (%)

    N/A

  • Maximale Leistungsaufnahme (W)

    380 - 600

  • Dämpfungsfaktor

    200

  • Abmessungen (mm)

    720 x 400 x 610

  • Gewicht (kg)

    165

  • Offizieller Link