The CAD-211FE is a mono tube power amplifier from Cary Audio, sold in pairs at USD 20,000. FE stands for Founder's Edition, which Cary announced after 17 years of continuous production of the CAD 211. Cary describes it as a fully balanced reference design and states that it is used in professional recording and mastering studios.
Key specs that matter
Power output is 70 W in class A, 110 W in class AB and up to 150 W in class B. Each chassis carries one 6CA7 current source tube, one 6SL7 input tube, two 300B driver stage tubes and two 845 output tubes. Inputs are single-ended RCA and balanced XLR. Input sensitivity is 2.0 V for full output, with an input impedance of 100 kohms on RCA and 200 kohms on XLR. Frequency response is 20 Hz - 20 kHz (±0.5 dB), and noise and hum are more than 80 dB below rated output. Consumption is 280 W in operation and 76 W in standby from 117 or 234 VAC at 50/60 Hz. Each monoblock measures 254 x 311 x 610 mm (H x W x D) and weighs 41 kg.
Engineering and use context
Cary specifies the input sensitivity at zero feedback. Its power transformer is an EI laminate type, and the output transformer is an EI laminate air-gap design, both rated for a 200% duty cycle. Four 1500 µF capacitors rated at 450 VDC form the power supply reservoir. Resistors are 1% metal film, Mundorf SilverGold capacitors are used, and the three-conductor AC cord is detachable.
Two switches stage the start-up. The power switch lights the 6SL7, 6CA7 and 300B tubes, and the standby switch then turns on the 845 filaments. A bias meter is built into the front of the chassis, while the adjustment pot and a jack for an external meter sit at the back. Bias for the 845s is factory preset to 100 mA, and the 300B and 845 tubes have separate fuses. Cary states that current production and NOS 845, 300B and 6SL7 tubes all work in the amplifier. The chassis is Anthracite Black with a silver or black aluminium faceplate, and other automotive colours are offered. Cary lists 5 minutes before operation after power-on, and break-in is 100 hours of playing time. A removable cage cover costs extra.
Pairing
Three 5-way binding posts give 4, 8 and 16 ohm taps for the loudspeaker. A preamplifier with balanced outputs connects to the XLR input, wired pin 1 ground, pin 2 positive and pin 3 negative.
Alternatives
The CAD-805RS is another Cary Audio tube monoblock power amplifier.