Hifiverse

Vollverstärker - Chord ULTIMA INTEGRATED

Beschreibung, Bilder, technische Daten und Spezifikationen

Chord ULTIMA INTEGRATED
Bildquelle - (c) Chord

The ULTIMA INTEGRATED is a 125 W stereo integrated amplifier from Chord Electronics. Five years after the introduction of ULTIMA, founder, owner and chief engineer John Franks brought that topology into a full-width integrated amplifier for the first time. Chord calls it its first new integrated amplifier for seven years, and it remains the only full-width integrated model in the range. The UK price is GBP 8,500.

Key specs that matter

Power output is 125 W into 8 ohms, and maximum output voltage is 35 V RMS. Inputs are one stereo balanced XLR (input 1) and three stereo RCA (inputs 2 - 4), with input impedance of 100 kohm and a maximum input voltage of 3 V RMS. A stereo balanced XLR AV bypass input, one stereo XLR output and a 12 V trigger that works as output or input complete the rear panel. Gain is 21 dB. Chord specifies frequency response of 10 Hz - 200 kHz (±3 dB), THD of 0.01% (20 Hz - 20 kHz), S/N ratio of 90 dB on all inputs and channel separation of 100 dB. Operating voltage is 80 - 250 V AC, auto-switching, with power consumption of 200 W and 1 W in standby. With the included Integra legs it measures 130 x 480 x 380 mm (H x W x D), and with the optional side blocks 110 x 430 x 380 mm. Weight is 14.75 kg.

Engineering and use context

Its ULTIMA circuit uses dual feed-forward error correction, monitoring the audio signal and correcting it before the output stage. Key features listed by Chord are proprietary MOSFETs, an HF switch-mode power supply and fully balanced circuitry. Each of the four inputs is individually buffered and filtered against radio frequency interference, and input selection uses microprocessor-controlled sealed relays.

All metalwork, including the Integra legs, is precision-machined from solid aircraft-grade aluminium. A 28 mm thick front panel carries a spherical power control with polychromatic lighting between illuminated volume and balance controls. The sphere shows red in standby, then green and cyan when the amplifier is on. AV bypass is selected by pressing and holding the balance/AV knob, the light ring turns purple, and the volume control is bypassed. Leg options are Argent silver and Jett black, and the gloss black acrylic side blocks cannot be stacked. An IR remote control and a top light ring are included, and the warranty is five years.

Pairing

The loudspeaker terminals accept 4 mm banana plugs and spades. Its XLR preamplifier output allows bi-amping with an additional power amplifier, and Chord amplifiers are gain-matched. The AV bypass input accepts the balanced output of an AV processor or receiver.

Alternatives

The Chord ANNI is the brand's compact desktop integrated amplifier.

Spezifikationen

  • Modellbezeichnung

    ULTIMA INTEGRATED

  • Typ

    Integrated Amplifier with DAC

  • Analogeingänge (symmetrisch)

    1

  • Analogeingänge (unsymmetrisch)

    3

  • Eingangsempfindlichkeit (mV)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    100 000

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    100 000

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • D/A-Wandlung

    Ja

  • Phono MM/MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    N/A

  • Ausgangsleistung (8Ω) (W)

    N/A

  • Ausgangsleistung (4Ω) (W)

    N/A

  • Verstärkung (dBu)

    21

  • Untere Grenzfrequenz +/- 3dB (Hz)

    10

  • Obere Grenzfrequenz +/- 3dB (Hz)

    200 000

  • Signal-Rausch-Abstand (dB)

    90

  • Klirrfaktor + Rauschen (%)

    N/A

  • Dämpfungsfaktor

    N/A

  • Abmessungen (mm)

    130 x 480 x 380

  • Gewicht (kg)

    14.75

  • Offizieller Link

Weitere Komponenten