Hifiverse

Vollverstärker - Goldmund TELOS 670

Beschreibung, Bilder, technische Daten und Spezifikationen

Goldmund TELOS 670
Bildquelle - (c) Goldmund

The Telos 670 is an integrated amplifier from Goldmund of Geneva that combines preamplifier and power amplifier functions in one chassis for passive loudspeakers. Digital inputs sit next to the analogue ones on the rear panel. In the current Telos family the Telos 690 and Telos 790 are the larger integrated models.

Key specs that matter

Maximum power is 2 x 215 W RMS into 8 ohms at 1% THD (IEC 60065). THD+N is below 0.08% from 20 Hz to 20 kHz at 30 V RMS output, unloaded, and IMD (SMPTE) is below 0.02%. Output noise floor is below 10 µV from 20 Hz to 20 kHz with shorted analogue inputs, and dynamic range is 100 dB (22 kHz bandwidth, unloaded). Gain is 35 dB, damping factor is 600 at 1 kHz into 8 ohms, and maximum output before clipping is 170 Vpp. Maximum input level is 1 V RMS analogue and -6 dBFS digital. Inputs are five analogue RCA pairs, USB Audio Class 2.0 up to 384 kHz and 32 bit with DSD64 and DSD128 over PCM, one Toslink optical and one 75 ohm coaxial S/PDIF. Rated power consumption is 250 W at 1/8 output power into 8 ohms. Dimensions are 440 x 160 x 395 mm (W x H x D), and weight is 24.5 kg.

Engineering and use context

Goldmund uses its proprietary Telos amplification technology, a Class A/B circuit architecture. A dual-circuit layout separates the low-current and high-current paths to prevent interference between them. Many critical components are designed and manufactured exclusively for Goldmund. According to the company, the reduced output impedance prevents woofer overshoot.

Its 9 mm aluminium casing and a 30 mm thick radiator chassis act as a passive heat sink, with no active cooling. This aluminium enclosure is also a Faraday cage, and the chassis stands on conic feet. Power comes from two 300 VA toroidal transformers and a 13,600 µF capacitor bank, for 115 V or 230 V mains (±15%) set by a voltage selector.

On the rear panel are one pair of speaker binding posts, the power switch and an RS232 command connector. USB playback needs no driver on Mac OS X from version 10.6.4 or on Linux, while Windows requires a driver. The standard finish is grey micro-blasted aluminium, and black is available on request.

Pairing

Passive loudspeakers with a single pair of terminals connect directly. A computer, CD transport or television connects over USB, Toslink or coaxial S/PDIF. A turntable requires an external phono stage on one of the RCA inputs.

Alternatives

The Telos 690 is the larger integrated amplifier in the same Goldmund Telos family.

Spezifikationen

  • Modellbezeichnung

    TELOS 670

  • Typ

    Integrated Stereo Amplifier

  • Analogeingänge (symmetrisch)

    N/A

  • Analogeingänge (unsymmetrisch)

    5

  • Eingangsempfindlichkeit (mV)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • D/A-Wandlung

    Ja

  • Phono MM/MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    N/A

  • Ausgangsleistung (8Ω) (W)

    2 x 215

  • Ausgangsleistung (4Ω) (W)

    N/A

  • Verstärkung (dBu)

    35

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Signal-Rausch-Abstand (dB)

    N/A

  • Klirrfaktor + Rauschen (%)

    <0.08

  • Dämpfungsfaktor

    600

  • Abmessungen (mm)

    440 x 160 x 395

  • Gewicht (kg)

    24.5

  • Offizieller Link