Hifiverse

Vollverstärker - PS Audio Stellar Strata MK2

Beschreibung, Bilder, technische Daten und Spezifikationen

PS Audio Stellar Strata MK2
Bildquelle - (c) PS Audio

The Stellar Strata MK2 from PS Audio combines a full-function DAC, a preamplifier, an MM and MC phono stage, a Class A headphone amplifier and a 150 W per channel power amplifier in one chassis. It is offered in black or silver and comes with a remote control. The chassis measures 432 x 71 x 343 mm and weighs 9.5 kg.

Key specs that matter

Rated output is 100 W minimum into 8 ohms and 150 W typical into 4 ohms (1 kHz, 1% THD). Frequency response is 20 Hz - 20 kHz (±1 dB), -3 dB at 7 Hz and 40 kHz. THD+N is 0.02% (1 kHz, 10 W into 4 ohms) and IMD is -65 dB (18/19 kHz). Damping factor is 29 (50 Hz, 4 ohms), and output impedance is 150 milliohms typical at 50 Hz. Gain is 30.5 dB relative to the line output. The phono stage has 40 dB of gain for MM at 47 kohms/100 pF and 57 dB for MC at 100 ohms/470 pF. Its headphone output delivers 300 mW into 300 ohms and 3.25 W into 16 ohms (1 kHz, 1% THD).

Engineering and use context

Analogue inputs are two RCA pairs at 47 kohms and one XLR pair at 100 kohms, plus separate MM and MC RCA phono inputs. Digital inputs comprise two I2S (PCM 44.1-384 kHz, DSD64, DSD128 and DSD256), two coaxial and one optical (PCM 44.1-192 kHz) and one USB (PCM 44.1-384 kHz, DSD64 and DSD128 native or via DoP). On the rear panel are one RCA line output with 100 ohms output impedance, two pairs of binding posts, two 3.5 mm trigger outputs and a USB-A port for firmware updates.

A new version of PS Audio's Analog Cell uses Class A biased MOSFETs, and the output stage is a high-current Class A hybrid design. Volume is set by an all-new no-loss analogue attenuator that responds to the front panel controls, over a 0-100 scale with an 80 dB range. Balance adjusts by ±12 dB in 1/4 dB steps, and each input has ±10 dB of trim. Three selectable digital filters work on PCM sources, phase control is available for digital sources, and Digital Lens technology is included. Consumption is 20 W at idle and 50 W typical.

Pairing

Loudspeakers with an impedance of at least 4 ohms are required. Headphones from 8 ohms connect to the 1/4-inch jack. MM and MC cartridges connect without a separate phono stage.

Alternatives

The Sprout100 is a smaller PS Audio integrated amplifier.

Spezifikationen

  • Modellbezeichnung

    Stellar Strata MK2

  • Typ

    Integrated Amplifier with DAC and Phono

  • Analogeingänge (symmetrisch)

    1

  • Analogeingänge (unsymmetrisch)

    2

  • Eingangsempfindlichkeit (mV)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    100 000

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    47 000

  • Ausgangsimpedanz (symmetrisch) (Ω)

    50

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • D/A-Wandlung

    Ja

  • Phono MM/MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    47 000 (MM) + 100 (MC)

  • Ausgangsleistung (8Ω) (W)

    100

  • Ausgangsleistung (4Ω) (W)

    150

  • Verstärkung (dBu)

    30.5

  • Untere Grenzfrequenz +/- 3dB (Hz)

    7

  • Obere Grenzfrequenz +/- 3dB (Hz)

    40 000

  • Signal-Rausch-Abstand (dB)

    N/A

  • Klirrfaktor + Rauschen (%)

    0.02

  • Dämpfungsfaktor

    29

  • Abmessungen (mm)

    559 x 203 x 43

  • Gewicht (kg)

    11.4

  • Offizieller Link

Weitere Komponenten