The A20i is a stereo tube integrated amplifier from Audio Hungary, sold under the Qualiton name. It is a class A design with a push-pull output stage. Audio Hungary now lists the A20i as a discontinued product, and its last catalogue price was EUR 4,800 including VAT.
Key specs that matter
Rated output power is 2 x 20 W into a nominal load of 8 ohms. The tube complement is four 5881, two E88CC/6922 and two Tungsram ECC83. There are three unbalanced inputs and one pair of output terminals per channel. Gain is +34.8 dB, input sensitivity is 230 mV (unbalanced) and input impedance is 10 kOhm, with non-inverting output polarity. Frequency response is 25 Hz - 100 kHz (-3 dB, rated output power). Total harmonic distortion is below 0.3% (1 kHz, rated output power). Signal-to-noise ratio is above 90 dB, and output noise is below 1 mV. Power requirement is 150 W. Dimensions are 270 x 180 x 300 mm, and weight is 16 kg.
Engineering and use context
The 5881 tubes are used in the output stage. According to Audio Hungary, the output transformers also allow the connection of speakers with a nominal impedance of 4 ohms. With such a load the measured parameters deviate slightly from the published 8 ohm figures.
Its chassis is made of 1.5 mm thick solid stainless steel sheet in a Black Mirror polished finish. On the front panel the volume control potentiometer and the input selector are mounted on the same axis. An LED next to the volume control shows when the amplifier is ready for use by changing from red to white, and the front panel also indicates the selected input.
The Qualiton A20i has no phono input, no balanced input and no headphone output. Speaker outputs are on the rear panel.
Pairing
Line-level sources such as CD players, DACs and network streamers connect directly. A separate phono stage is required for a turntable. Loudspeakers with a nominal impedance of 8 ohms match the output transformers.
Alternatives
The Qualiton A35i is the higher-power integrated amplifier in the same Audio Hungary range.