The Puccini Anniversary is an integrated amplifier from Audio Analogue of Italy and part of its Anniversary line designed by Airtech. Airtech is the brand created in 2013 by Audio Analogue co-founder Claudio Bertini. The original Puccini was the first Audio Analogue amplifier, a 40 W integrated shown as a prototype at CES in Las Vegas in January 1996, and this edition marks twenty years of the model. Each unit is hand-built in Tuscany.
Key specs that matter
Output power is 80 W into 8 ohms, 160 W into 4 ohms and 300 W into 2 ohms, each at 1% THD+N. Input sensitivity is 490 mV RMS for nominal output into 8 ohms. Frequency response extends to 80 kHz (-3 dB). Output resistance is 0.17 ohms (nominal output into 2 ohms, 1 kHz). Noise level is 30 µV over a 0 Hz - 80 kHz bandwidth and 10 µV A-weighted, and SNR is 110 dB. There are four RCA inputs and one XLR input, all with an input impedance of 47 kohms. Standby consumption is 0.5 W. Dimensions are 120 x 445 x 390 mm (H x W x D), and weight is 15.5 kg.
Engineering and use context
Audio Analogue designed the Puccini Anniversary without global feedback, with a fully balanced circuit and fully dual-mono circuitry. According to the company, the amplifier is therefore less sensitive to the load and free of any tendency to oscillate, of high-frequency resonance peaks and of saturation in the input stages. A 700 VA transformer powers the output stage, which uses six pairs of ON Semiconductor power transistors, three pairs per channel.
Volume is set by an encoder that controls four Analog Devices digital potentiometers, two per channel. Four volume curves are selectable according to the sensitivity of the loudspeakers. White LEDs indicate volume level and selected input, with brightness adjustable on two levels or switched off. Its gold-plated RCA connectors have Teflon insulation, are soldered directly to the input board and are switched by signal relays.
Internal wiring uses pure solid copper 7N OCC conductors. Military standard resistors, polypropylene capacitors and gold-plated copper output connectors complete the parts list. A heavy metal cabinet carries a 14 mm brushed aluminium front panel, and a remote control is included. Finishes are natural aluminium or satin black.
Pairing
Loudspeakers with a nominal impedance of 4 or 8 ohms are within its power rating. The XLR input accepts a balanced source. A turntable requires an external phono stage.
Alternatives
The Maestro Anniversary is the more powerful integrated amplifier of the same line, rated at 150 W into 8 ohms.