The № 5802 is an integrated amplifier for digital sources from Mark Levinson, introduced in 2019 together with the № 5805. It combines a preamplifier, the PrecisionLink II DAC and a class AB power amplifier in one chassis of the № 5000 series design, and it is designed, engineered and precision-crafted in the USA. The US price was USD 8,500. There are no analogue inputs, and every source connects through a digital input or Bluetooth.
Key specs that matter
Output power is 125 W RMS per channel at 8 ohms, 20 Hz - 20 kHz, nearly 250 W at 4 ohms, with stable operation down to 2 ohms. THD+N is below 0.035% (1 kHz, 125 W, 8 ohms). Frequency response is below 2 Hz to 100 kHz (+0/-3 dB), and S/N is above 103 dB (A-weighted). Output impedance is below 0.098 ohms and damping factor above 82 (20 Hz - 10 kHz). Digital inputs are 1 x AES/EBU (XLR), 2 x coaxial S/PDIF (RCA), 2 x optical (Toslink) and 1 x asynchronous USB (USB-B), plus Bluetooth with aptX HD. PCM is accepted at 32 to 384 kHz and up to 32 bits, DSD native or DoP at 2.8, 5.6 and 11.2 MHz, with full MQA decoding. DAC output is 5.7 V RMS at full scale. Size is 438 x 145 x 507 mm (W x H x D) and weight is 27.6 kg.
Engineering and use context
PrecisionLink II pairs an ESS Sabre 32-bit D/A converter with jitter elimination circuitry and a fully balanced, discrete current-to-voltage converter. Seven PCM filters, up-sampling to 352.8 or 384 kHz and four DSD filters are user-selectable. Its dual monaural amplifier channels are fully discrete and direct-coupled, and the voltage gain stage is descended from the № 534 power amplifier. Each output stage has two high-speed driver transistors operating in class A and six 260 V, 15 A output transistors, and two Thermal-Trak devices hold the output bias stable regardless of load or temperature. Power comes from a 500+ VA toroidal transformer with individual secondary windings per channel, and four 10,000 µF capacitors per channel are on the output stage board.
On the front, the MainDrive headphone output (6.35 mm) uses a preamp output stage that drives headphones directly in pure class A, with output impedance below 2.5 ohms. The 25 mm bead-blasted, black-anodised aluminium front panel frames a glass display. Control connections are Ethernet, RS-232, an IR input and 12 V trigger input and output, and setup and software updates run through a web page.
Pairing
Two pairs of high-current binding posts allow bi-wiring. The variable RCA line output allows an external power amplifier or active subwoofer. Analogue sources require the № 5805.
Alternatives
The Mark Levinson № 5805 is the sister integrated amplifier with one balanced and two single-ended line inputs and MM and MC phono stages in place of the AES/EBU and second coaxial inputs.