The 340i X is a stereo integrated amplifier from MOON by Simaudio, the Canadian manufacturer that designs and hand-assembles its products in Boucherville, Québec, and backs them with a 10-year warranty. It belongs to the Neo series and sits above the entry-level 240i. Inside the chassis there is room for an optional MC/MM phono stage and an optional DAC.
Key specs that matter
Output power is 100 W per channel into 8 ohms and 200 W per channel into 4 ohms, with class A output to 5 W and class A/B operation beyond. Gain is 37 dB, input sensitivity is 370 mV - 3.0 V RMS and input impedance is 11 kohm. THD (20 Hz - 20 kHz) is below 0.015% at 1 W and below 0.05% at 100 W, IMD is below 0.03%, crosstalk is -88 dB (1 kHz), and signal-to-noise ratio is 110 dB at full power. Frequency response is 2 Hz - 90 kHz (+0/-3 dB). Its power supply has a 400 VA transformer and 40,000 µF of capacitance. Dimensions are 429 x 89 x 376 mm (W x H x D), shipping weight is 13 kg, and black, silver and 2-tone finishes are offered depending on region.
Engineering and use context
MOON specifies an oversized power supply with a custom toroidal transformer and precision-matched proprietary MOON Bipolar output transistors. Six line-level inputs comprise four RCA pairs, a front 3.5 mm mini-jack and one balanced XLR pair. One single-ended input works as a pass-through that bypasses the gain stage, for a home-theatre processor with its own volume control. On the rear panel are FIX and VAR RCA outputs, SimLink in and out jacks, an IR input, a 12 V trigger output and a bi-directional RS-232 port on a DB9 connector for custom integration and firmware updates. A 6.35 mm TRS headphone output is on the front panel.
With the optional DAC installed, the 340i X gains one Toslink, two S/PDIF and one USB input on an ESS9018K2M converter, with PCM up to 32-bit/384 kHz and DSD64, DSD128 and DSD256 via USB. The optional MC/MM phono section uses input A3/P and has adjustable gain (40, 50, 54, 60 or 66 dB), input impedance (10, 100 or 475 ohms, or 47 kohm) and capacitance (0, 100, 330 or 430 pF). A CRM-3 remote is supplied. Simaudio describes a rigid chassis and designs the amplifier to stay powered up at all times.
Pairing
Loudspeakers with 4 ohm nominal impedance are within the rated output. With the phono section installed, a turntable with an MM or MC cartridge connects directly. The VAR output allows a power amplifier, and the 12 V trigger output switches a second component.
Alternatives
The MOON 240i is the smaller integrated amplifier in the same series.