Hifiverse

Vollverstärker - TOPPING Mini300

Beschreibung, Bilder, technische Daten und Spezifikationen

TOPPING Mini300
Bildquelle - (c) TOPPING

The Mini 300 is a compact stereo power amplifier from TOPPING, the Chinese maker of DACs and headphone amplifiers founded in 2008. TOPPING lists it in the Mini series of its power amplifiers and specifies Class D operation. It has an analogue volume control of its own. The European price was EUR 139, and silver, black and white versions are offered.

Key specs that matter

Output power is 2 x 125 W into 4 ohms at THD+N below 1%, or 2 x 140 W at below 10%. Into 8 ohms the figures are 2 x 65 W and 2 x 85 W. On the balanced input, THD+N (1 kHz, A-weighted, 5 W) is below 0.0005% into 4 ohms and below 0.0004% into 8 ohms, and on the RCA input below 0.0006% and 0.0005%. SNR (max. output, 1 kHz, A-weighted) and dynamic range are 124 dB balanced and 121 dB single-ended. Frequency response is 20 Hz - 40 kHz (±0.3 dB), and noise is below 15 µVrms (A-weighted). Channel crosstalk at 1 kHz is -106 dB balanced and -90 dB single-ended. Gain is 19.2 dB with 2.6 Vrms input sensitivity on the balanced input and 25.0 dB with 1.3 Vrms on RCA. Channel balance is 0.1 dB, and the rated load is 4-8 ohms. Measured with protrusions, the case is 166 x 129 x 41 mm, and weight is 665 g.

Engineering and use context

Inputs are a pair of 6.35 mm TRS balanced sockets and a pair of RCA sockets, selected with the BAL/SE switch on the front panel. Its power switch has ON, OFF and TRIG positions. In TRIG an upstream device switches the amplifier on and to standby through the 12 V trigger input, a 3.5 mm jack on the rear panel. A white LED is the only display.

TOPPING describes the Mini 300 as internally bridged, with a BTL output architecture. Each black negative terminal is therefore not a common ground and must not be shared, grounded or connected in series. Power comes from an external DC 38 V/4.0 A adapter with a two-pin aviation connector. Standby consumption is below 0.5 W. The box contains the amplifier, the power adapter, a power cable and a product information card.

Pairing

A DAC or preamplifier with TRS balanced or RCA outputs is required. Loudspeakers of 4 to 8 ohms are specified. No output terminal may be shared between channels.

Alternatives

The PA3s is another compact stereo power amplifier in the TOPPING range.

Spezifikationen

  • Modellbezeichnung

    Mini300

  • Typ

    Integrated Amplifier

  • Analogeingänge (symmetrisch)

    N/A

  • Analogeingänge (unsymmetrisch)

    1

  • Eingangsempfindlichkeit (mV)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • D/A-Wandlung

    k. A.

  • Phono MM/MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    N/A

  • Ausgangsleistung (8Ω) (W)

    N/A

  • Ausgangsleistung (4Ω) (W)

    140

  • Verstärkung (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Signal-Rausch-Abstand (dB)

    124

  • Klirrfaktor + Rauschen (%)

    <0,0005

  • Dämpfungsfaktor

    N/A

  • Abmessungen (mm)

    N/A

  • Gewicht (kg)

    N/A

  • Offizieller Link