Hifiverse

Vollverstärker - NAD M33

Beschreibung, Bilder, technische Daten und Spezifikationen

NAD M33
Bildquelle - (c) NAD

The Masters M33 is NAD's BluOS Streaming DAC Amplifier, a stereo integrated amplifier with a network streamer, an ESS Sabre DAC, an MM/MC phono stage and a discrete headphone amplifier in one aluminium case. Its output stage is the HybridDigital Purifi Eigentakt amplifier. Regular US price is USD 6,499.

Key specs that matter

Rated output is above 200 W into 8 ohms and above 380 W into 4 ohms (20 Hz - 20 kHz, both channels driven), with THD below 0.003% from 1 W to 200 W. Bridge mode gives more than 700 W into 8 ohms. Clipping power is above 210 W, IHF dynamic power is 260 W into 8 ohms and 520 W into 4 ohms, and peak output current is 25 A or more (1 ohm, 1 ms). Signal-to-noise ratio is above 98 dB ref. 1 W and above 120 dB ref. 200 W (A-weighted, 8 ohms). Damping factor exceeds 800 (8 ohms, 20 Hz - 6.5 kHz). Frequency response is ±0.2 dB from 20 Hz to 20 kHz, -3 dB at 60 kHz. Input sensitivity for 200 W is 865 mV, and line input impedance is 47 kohms / 180 pF. Phono sensitivity is 1.2 mV for MM at 56 kohms / 100 pF and 100 µV for MC at 100 ohms / 280 pF, with RIAA accuracy of ±0.2 dB. Dimensions are 435 x 133 x 396 mm (W x H x D), and weight is 9.7 kg.

Engineering and use context

Eigentakt is the amplifier technology of the Danish company Purifi. Conversion uses the ESS Sabre ES9028PRO, with its 32-bit HyperStream architecture, Time Domain Jitter Eliminator and programmable output filter. BluOS runs on a Linux kernel and an NXP 1 GHz ARM Cortex A9 processor, plays up to 24-bit/192 kHz and MQA, and connects over Gigabit Ethernet or Wi-Fi 5. AirPlay 2, Spotify Connect and TIDAL Connect are supported, and two-way aptX HD Bluetooth can receive or send to wireless headphones. The phono stage includes a phase-cancelling infrasonic filter and precision A/D conversion.

Six digital inputs are two optical, two coaxial, AES/EBU on XLR and HDMI eARC, next to a USB Type-A port. Analogue inputs are one balanced XLR, two RCA line and the MM/MC phono. At the rear sit two sets of speaker outputs, two independent subwoofer outputs with a configurable digital crossover and a preamp output with 100 ohm output impedance. The headphone output has 2.2 ohms output impedance and gives over 100 mW into 32 ohms. A 7-inch colour touchscreen and a volume knob are on the front. Control is by an HTRM 2 remote, 12 V trigger in and two outs and an IR input, plus two MDC slots. Machined iso-point feet have self-centring cups.

Pairing

The two sets of speaker outputs allow bi-wiring. MM and MC cartridges connect to the built-in phono stage. An external power amplifier and up to two powered subwoofers connect to the pre-out and subwoofer outputs.

Alternatives

The NAD C 389 is the 130 W per channel HybridDigital UcD integrated amplifier with the same ESS Sabre 9028 DAC chip.

Spezifikationen

  • Modellbezeichnung

    M33

  • Typ

    Intagrated Amplifier with Streamer, Phono and DAC

  • Analogeingänge (symmetrisch)

    1

  • Analogeingänge (unsymmetrisch)

    2 + 1 (Phono)

  • Eingangsempfindlichkeit (mV)

    865

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • D/A-Wandlung

    Ja

  • Phono MM/MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    N/A

  • Ausgangsleistung (8Ω) (W)

    200

  • Ausgangsleistung (4Ω) (W)

    380

  • Verstärkung (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    20

  • Obere Grenzfrequenz +/- 3dB (Hz)

    60 000

  • Signal-Rausch-Abstand (dB)

    >98

  • Klirrfaktor + Rauschen (%)

    <0.003

  • Dämpfungsfaktor

    >800

  • Abmessungen (mm)

    435 x 133 x 396

  • Gewicht (kg)

    9.7

  • Offizieller Link

Weitere Komponenten