Hifiverse

Vollverstärker - Mola Mola Kula

Beschreibung, Bilder, technische Daten und Spezifikationen

Mola Mola Kula
Bildquelle - (c) Mola Mola

Kula is an integrated amplifier from Mola Mola of the Netherlands. It combines a Mola Mola power amplifier with the line stage and chassis of the Makua preamplifier, while a phono stage and a DAC are available as optional modules. Mola Mola describes the result as an à la carte modular design.

Key specs that matter

Output power is 2 x 150 W into 8 ohms and 2 x 300 W into 4 ohms. THD at 1 kHz is below 0.0004% (100 W/8 ohms and 200 W/4 ohms), and the unweighted signal-to-noise ratio is 113 dB. Bandwidth is 50 kHz (-3 dB). Gain resolution is below 1 dB, and better than 0.2 dB over the normal listening range. Three balanced and three unbalanced analogue inputs are provided, with an input impedance of 100 kOhm and a maximum input level of 20 dBu (7.75 Vrms). Loudspeakers connect to two pairs of Furutech binding posts. Dimensions are 420 x 110 x 370 mm (W x H x D) including the volume knob and connectors, and weight is 11 kg.

Engineering and use context

Inputs are selected by switches under software control, and any input can be routed through optional processor boards such as the phono stage. Software processing covers balance, input gain offset, phase invert, mono sum and a mastering mode, and six presets are programmable. Inside, the binding posts are wired directly to the amplifier PCB with Kubala-Sosna cable.

Like the line stage, the optional phono stage is taken from the Makua. It has independently adjustable settings and up to six separate inputs. The optional DAC section is identical to the stand-alone Tambaqui and adds five digital inputs, including a Roon endpoint and Bluetooth. With the DAC installed the Kula is Roon Ready certified. Operation is by remote control or the Mola Mola Remote app, with full software control of routing and processing.

Pairing

Loudspeakers of 8 or 4 ohms nominal impedance are within the rated loads. A turntable requires the optional phono module. Digital sources require the optional DAC module or an external DAC on a line input, and the matching stand-alone DAC is the Tambaqui.

Alternatives

Mola Mola has no other integrated amplifier in its range.

Spezifikationen

  • Modellbezeichnung

    Kula

  • Typ

    Intagrated Amplifier with DAC

  • Analogeingänge (symmetrisch)

    3

  • Analogeingänge (unsymmetrisch)

    3

  • Eingangsempfindlichkeit (mV)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • D/A-Wandlung

    Ja

  • Phono MM/MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    N/A

  • Ausgangsleistung (8Ω) (W)

    150

  • Ausgangsleistung (4Ω) (W)

    300

  • Verstärkung (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    20

  • Obere Grenzfrequenz +/- 3dB (Hz)

    20 000

  • Signal-Rausch-Abstand (dB)

    113

  • Klirrfaktor + Rauschen (%)

    <0.0004

  • Dämpfungsfaktor

    N/A

  • Abmessungen (mm)

    420 x 110 x 370

  • Gewicht (kg)

    11

  • Offizieller Link