KIN AMP GEN1 is the first version of the compact Bluetooth stereo amplifier from KIN by Totem, designed by Totem Acoustic in Montreal. It was introduced on 12 September 2019 as Totem's first integrated amplifier, with an MSRP of USD 699. Totem specifies it for a number of its own monitors and towers. The KIN site still lists the GEN1 at a regular price of CAD 799, in black or white.
Key specs that matter
Amplifier type is class D. Power output is 2 x 100 W RMS into 4 ohms at 1% THD. THD is below 0.1% (1 W, 30 kHz filter), and signal-to-noise ratio is above 86 dB. Frequency response is 20 Hz - 20 kHz (±3 dB). The optical input accepts up to 24-bit/192 kHz, and Bluetooth with aptX HD runs at sampling rates up to 48 kHz. Its subwoofer output covers 20 - 220 Hz (±3 dB). Dimensions are 255 x 60 x 235 mm (W x H x D), and weight is 2.4 kg.
Engineering and use context
On the rear panel are Aux 1 stereo RCA inputs switchable between Line and Phono with a ground post, an Aux 2 3.5 mm mini jack, Aux 3 optical (Toslink), the Sub Out and a Bluetooth antenna. Decoding covers MP2/MP3, WMA, FLAC (8/16/24-bit), AAC/MP4/M4A, WAV (IMA-ADPCM and raw PCM), AIF and AIFC.
Its front is a touch-capacitance display. A touch on the display selects the input and sets the volume up to a maximum of 60, and it also wakes the amplifier from standby. The display goes dark one minute after the last command, and the Totem Thunderbird logo stays lit while the power is on. Bass and treble are set from the 17-key aluminium remote, which also has a reset to the factory tone settings.
After 60 minutes without an audio input the amplifier enters standby. A voltage selector on the rear sets 115 V or 230 V. The remote and a power cord are supplied, and in a system package with Totem speakers two speaker wires, an optical cable and a 3.5 mm cable are added. Totem amplifiers carry a two-year limited warranty.
Pairing
Passive speakers rated at 4 ohms or higher are required. Totem offered the amplifier in a combo with the passive KIN ONE bookshelf speakers. A turntable without its own phono preamp connects to Aux 1 in Phono mode, and Sub Out connects a powered subwoofer by a single RCA cable.
Alternatives
The KIN AMP is the newer stereo amplifier in the KIN by Totem range.