Hifiverse

Vollverstärker - Audio Note Jinro

Beschreibung, Bilder, technische Daten und Spezifikationen

Audio Note Jinro
Bildquelle - (c) Audio Note

The Jinro is a single-ended tube integrated amplifier from Audio Note UK, operating in pure class A with the 211 directly heated triode in its output stage. Its circuit design and topology are the same as in the Audio Note Ongaku. Where the Ongaku uses silver wherever possible, including all transformer windings, the Jinro uses copper. Audio Note says the amplifier was engineered for sonic performance rather than technical specification.

Key specs that matter

Maximum output is approximately 20 W per channel into 4 or 8 ohm loads. Input impedance is 100 kohms at line level, and input sensitivity is 450 mV for full output. Channel balance is ±0.3 dB. The tube complement is two 211 output triodes, two 5R4WGB rectifier tubes, one ECC82 (or 5814A) and one 7044. Mains input is AC 100-120 V or 220-240 V, 50/60 Hz, and maximum power consumption is 200 W. Dimensions are 305 x 305 x 640 mm (H x W x D), and weight is 38 kg.

Engineering and use context

Audio Note grades its products in Levels by circuit and component quality, and the Jinro fulfils every Level 3 criterion. Those criteria are pure class A operation, zero negative feedback, a single-ended output stage, tube rectification, directly heated triode operation, and a defined grade of materials and components. Each channel has a single 211 directly heated triode in its output stage. Two finishes are listed for the top plate - natural anodised aluminium or black anodised aluminium.

Pairing

A loudspeaker with high sensitivity is required. The output rating covers loudspeakers of 4 or 8 ohms nominal impedance. Sources connect at line level, and a turntable requires an external phono stage.

Alternatives

The Audio Note Ongaku is the Level 5 integrated amplifier on the same 211 circuit, with silver wire for all internal wiring and transformers.

Spezifikationen

  • Modellbezeichnung

    Jinro

  • Typ

    Integrated Amplifier

  • Analogeingänge (symmetrisch)

    N/A

  • Analogeingänge (unsymmetrisch)

    4

  • Eingangsempfindlichkeit (mV)

    450

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    100 000

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • D/A-Wandlung

    k. A.

  • Phono MM/MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    N/A

  • Ausgangsleistung (8Ω) (W)

    20

  • Ausgangsleistung (4Ω) (W)

    20

  • Verstärkung (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Signal-Rausch-Abstand (dB)

    N/A

  • Klirrfaktor + Rauschen (%)

    N/A

  • Dämpfungsfaktor

    N/A

  • Abmessungen (mm)

    305 x 305 x 640

  • Gewicht (kg)

    38

  • Offizieller Link