Hifiverse

Vollverstärker - Alluxity Int One mkII

Beschreibung, Bilder, technische Daten und Spezifikationen

Alluxity Int One mkII
Bildquelle - (c) Alluxity

The Int One mkII is an integrated amplifier from Alluxity, the Danish brand of AVM-TEC in Herning, created by Alexander Vitus Mogensen, whose family runs Vitus Audio. It replaces the Int One, Alluxity's best-selling product in North America, with a completely redesigned preamplifier stage, and it keeps the core physical dimensions of the original. It was launched in April 2021 at a US price of USD 9,500.

Key specs that matter

Rated output is approximately 200 W RMS into 8 ohms, 400 W into 4 ohms and 800 W into 2 ohms. There are three RCA and two XLR analogue inputs and one RCA pre out. Volume runs in 1 dB steps from -79 dB to +13 dB. Input sensitivity is 2 Vrms (RCA) or 4 Vrms (XLR), input impedance is 10 kohms and output impedance is 75 milliohms. Alluxity quotes a frequency response extending beyond 800 kHz, THD+N of 0.01% and a signal-to-noise ratio above 100 dB. Power consumption with no load is under 50 W. Dimensions are 43.5 x 10.5 x 33.5 cm (W x H x D), and weight is 17.5 kg.

Engineering and use context

With the new preamplifier stage, the mkII is fully balanced from input to output. Alluxity lists lower noise, a better signal-to-noise ratio, wider bandwidth and 6 dB more overall gain as the results of the balanced design. Its number of volume relays has been greatly increased, giving almost three times as many volume settings as the original Int One. All of this was done within the physical restrictions of the existing chassis, and original Int One amplifiers can be upgraded to mkII.

Alluxity's Power Two stereo power amplifier is built on the same basic topology as the Int One, a fully balanced class A/B design. Like all Alluxity casework, the chassis is milled from one piece of aluminium. Inputs and volume are shown on a 5 inch, 800 x 480 pixel resistive touch display. No streaming or phono module is included. Finishes are black, white, titanium grey and titanium orange, and custom colours are available on request.

Pairing

Loudspeakers down to 2 ohms are within the rated output. The RCA pre out allows a second power amplifier, such as the Alluxity Power Two, to be added. Phono sources need an external phono stage.

Alternatives

The original Alluxity Int One is the earlier version of this integrated amplifier, with a -69 dB to +6 dB volume range.

Spezifikationen

  • Modellbezeichnung

    Int One mkII

  • Typ

    Integrated Amplifier

  • Analogeingänge (symmetrisch)

    N/A

  • Analogeingänge (unsymmetrisch)

    N/A

  • Eingangsempfindlichkeit (mV)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • D/A-Wandlung

    k. A.

  • Phono MM/MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    N/A

  • Ausgangsleistung (8Ω) (W)

    N/A

  • Ausgangsleistung (4Ω) (W)

    N/A

  • Verstärkung (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Signal-Rausch-Abstand (dB)

    N/A

  • Klirrfaktor + Rauschen (%)

    N/A

  • Dämpfungsfaktor

    N/A

  • Abmessungen (mm)

    N/A

  • Gewicht (kg)

    N/A

  • Offizieller Link