Hifiverse

Vollverstärker - Pass Labs INT-250

Beschreibung, Bilder, technische Daten und Spezifikationen

Pass Labs INT-250
Bildquelle - (c) Pass Labs

The INT-250 is a stereo class AB integrated amplifier from Pass Labs of Auburn, California. It builds on the power supply and output stages of the Point 8 series power amplifiers and takes the INT-60 as its starting point, with 250 W per channel and higher-power MOSFETs in larger numbers. In silver the US price is about USD 13,860, and black is available to special order.

Key specs that matter

Output power is 250 W rms into 8 ohms and 500 W rms into 4 ohms. Distortion is 1% at 250 W, 8 ohms, 1 kHz. Frequency response is -6 dB at 80 kHz. Gain is 30 or 36 dB, input impedance is 45 kohms and damping factor is 150. Residual noise is below 250 uV at the output (unweighted, 20 Hz - 20 kHz). Inputs are four - two XLR/RCA and two RCA. Power consumption is 450 W, under 1 W in standby. Dimensions are 483 x 540 x 231 mm (W x D x H) and weight is 47.6 kg.

Engineering and use context

Inside, Pass uses the same toroidal transformer design as the Point 8 series, with both an electrostatic and a Mu metal shield, vacuum impregnation and epoxy fill. Pass states that this gives a transformer quiet both electrically and mechanically. Its power supply circuitry is lower in noise and has additional filtering.

A simplified preamp and volume control circuit removes some signal path parts. Designed by Wayne Colburn, the electronic volume control covers a 63 dB range in 1 dB steps and is driven by a micro-controller that reads an optical encoder on the front panel. Tracking of the two balanced channels and high common mode rejection are the stated aims. Digital control circuits run from a power supply isolated from the analogue supply, and the input and output signal never comes into contact with them. A socketed microprocessor allows software updates.

On inputs 1 and 2 the XLR and RCA sockets are connected, so only one of the two is used at a time, with XLR shorting jumpers in place for RCA use. Both speaker terminals are live, with no ground reference, and a white signal ground terminal on the rear panel is provided for active subwoofers. The INT-250 is designed to be left on all the time. A remote control and a power cord are included, and units sold in North America carry a transferable 3-year warranty.

Pairing

The preamp outputs drive a second system, a subwoofer or other amplifiers for bi-amping, and they mute together with the main outputs. Pass recommends balanced connections where possible.

Alternatives

The Pass Labs INT-60 is the lower-powered stereo integrated amplifier in the same range.

Spezifikationen

  • Modellbezeichnung

    INT-250

  • Typ

    Integrated Amplifier

  • Analogeingänge (symmetrisch)

    2

  • Analogeingänge (unsymmetrisch)

    4

  • Eingangsempfindlichkeit (mV)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    45 000

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    45 0000

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • D/A-Wandlung

    k. A.

  • Phono MM/MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    N/A

  • Ausgangsleistung (8Ω) (W)

    250

  • Ausgangsleistung (4Ω) (W)

    500

  • Verstärkung (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    1.5

  • Obere Grenzfrequenz +/- 3dB (Hz)

    100 000

  • Signal-Rausch-Abstand (dB)

    100

  • Klirrfaktor + Rauschen (%)

    1.0

  • Dämpfungsfaktor

    150

  • Abmessungen (mm)

    483 x 546 x 231

  • Gewicht (kg)

    48

  • Offizieller Link