The Inspiration 2 Integrated Amplifier is a solid-state integrated amplifier with a built-in headphone amplifier from Constellation Audio, the company founded in California in 2008. Inspiration 2 is Constellation's entry series, below Revelation 2, Performance 2 and Statement, and it also includes the Inspiration 2 Preamp, Stereo and Mono amplifiers. According to Constellation, the amplifier carries the core technologies first developed for its Reference Series.
Key specs that matter
Output power is 125 W into 8 ohms and 220 W into 4 ohms (0.1% THD+N, 20 Hz - 20 kHz). Inputs are 2 x XLR stereo and 2 x RCA stereo, plus a USB port for control only. Input sensitivity for full power is 3 V on the normal inputs and 15 V on the direct input into 8 ohms, or 2.6 V and 12.5 V into 4 ohms. Gain is 25.2 dB on the normal inputs and 12 dB on the direct input. Frequency response is 10 Hz - 80 kHz (±0.05 dB), and the damping factor is 64. Signal-to-noise ratio (DC - 90 kHz) is 100 dB A-weighted ref. 1 V, 115 dB unweighted and 125 dB A-weighted ref. full power. Outputs are a headphone jack and a 12 V trigger. Power draw is under 0.25 W in standby and 135 W at idle. Dimensions are 432 x 216 x 483 mm (W x H x D), and weight is 16 kg.
Engineering and use context
Its preamplifier section is Constellation's Line Stage Gain Module, a fully balanced circuit built with hand-matched low-noise transistors. A servo circuit monitors and continuously corrects the balance between the two halves of the signal. For the power stage Constellation uses Balanced Bridged technology, which combines identical single-ended amplifier modules with only N-type transistors.
Power comes from the C-SMPS, the Constellation Switched-Mode Power Supply. Its power factor correction keeps the supply stable at any AC mains voltage, with voltage and current in phase whatever the speaker load. Constellation quotes noise more than 20 dB lower than traditional power supplies and 20 percent more amplifier power from the C-SMPS.
Volume is set by a resistor-ladder control, digitally operated from the front-panel knob, with precise channel matching. Both an LCD touchscreen and a machined aluminium remote control operate the unit. A home theatre bypass is provided for use in a surround system. The headphone amplifier is designed for low-sensitivity and high-impedance headphones.
Pairing
Loudspeakers of 4 or 8 ohms nominal impedance are within its rated load. Balanced sources connect through XLR, and a surround processor connects through the home theatre bypass.
Alternatives
The Inspiration Integrated 1.0 is the earlier integrated amplifier in Constellation's legacy range.