Hifiverse

Vollverstärker - Pathos Acoustics InPoL Legacy

Beschreibung, Bilder, technische Daten und Spezifikationen

Pathos Acoustics InPoL Legacy
Bildquelle - (c) Pathos Acoustics

The InPoL Legacy is the reference stereo integrated amplifier of Pathos Acoustics, the Italian company that holds the worldwide patent on InPoL technology. Its name refers to co-founder and owner Gaetano Zanini, in the same way an earlier Pathos tribute model honoured co-founder Gianni Borinato. Pathos aimed to match its InPower and Adrenalin power amplifiers in one chassis and, unlike earlier models, set no limits on weight or size.

Key specs that matter

Output is 2 x 100 W into 8 ohms in pure class A. Frequency response is 2 Hz - 100 kHz (±0.5 dB). THD is 0.02% at 1 W and 0.5% at 100 W, both at 1 kHz, with a signal-to-noise ratio above 97 dB. Gain is 31 dB unbalanced and 25 dB balanced, input sensitivity is 700 mV RMS and maximum input voltage is 10 V RMS. Three balanced XLR and three unbalanced RCA line inputs are provided. Dimensions are 500 x 880 x 300 mm (W x D x H), and net weight is 140 kg.

Engineering and use context

InPoL, or Linear Pump Follower, is an amplification stage without feedback. It uses a single solid-state device in follower configuration, with a voltage gain of 1 and high current gain, and Pathos states that it raises the theoretical efficiency of pure class A from 25% to 50%. Pure class A bias avoids crossover distortion. In the Legacy two InPoL stages run in bridged configuration, and the amplifier is fully balanced and dual mono.

A tube stage does the voltage amplification. Each channel has two Tung-Sol ECC803s in totem pole configuration and one 6H30 as a buffer, for four ECC803 and two Sovtek 6H30 in total. The main power supply comes from the Adrenalin and InPower, with two 2 kVA toroidal transformers, the largest Pathos has made, a lamellar inductance and one capacitive inductive filter per channel. Filter capacitance is four 22,000 µF capacitors. Separately, every channel has a tube power supply with its own toroidal transformer. All supplies are stabilised, filtered and dissipated, and internal wiring is shielded.

Volume is a 100-step passive attenuator of low-noise precision resistors switched by insulated relays. Signal inputs are Neutrik jacks, and the speaker sockets are WBT.

Pairing

A source or preamplifier with balanced XLR or single-ended RCA line outputs is required. A stand rated for 140 kg is required, and Pathos offers a dedicated cabinet with lifting brackets supplied.

Alternatives

The Pathos InPoL2 MKII is a smaller pure class A InPoL integrated amplifier with 2 x 45 W into 8 ohms and an optional HiDac Mk2 board for digital inputs.

Spezifikationen

  • Modellbezeichnung

    InPoL Legacy

  • Typ

    integrated amplifier Pure class A

  • Analogeingänge (symmetrisch)

    3

  • Analogeingänge (unsymmetrisch)

    3

  • Eingangsempfindlichkeit (mV)

    700

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • D/A-Wandlung

    k. A.

  • Phono MM/MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    N/A

  • Ausgangsleistung (8Ω) (W)

    N/A

  • Ausgangsleistung (4Ω) (W)

    N/A

  • Verstärkung (dBu)

    31

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Signal-Rausch-Abstand (dB)

    97

  • Klirrfaktor + Rauschen (%)

    N/A

  • Dämpfungsfaktor

    N/A

  • Abmessungen (mm)

    500 X 880 X 300

  • Gewicht (kg)

    140

  • Offizieller Link