Hifiverse

Vollverstärker - Nuprime Audio IDA-9

Beschreibung, Bilder, technische Daten und Spezifikationen

Nuprime Audio IDA-9
Bildquelle - (c) Nuprime Audio

The IDA-9 is a hybrid Class A+D integrated amplifier with a built-in DAC from NuPrime Audio. It builds on the IDA-8 and doubles that model's RMS output power in the same compact chassis. Black and silver finishes are offered, and the price listed by NuPrime is USD 1,549.

Key specs that matter

RMS output power is 200 W x 2 into 8 ohms and 250 W x 2 into 4 ohms. THD+N is 0.005%, and frequency response is 10 Hz - 50 kHz. The USB input accepts PCM up to 384 kHz and DSD up to DSD256, while the coaxial and optical inputs take PCM up to 192 kHz and DSD64 in DoP format. One analogue stereo RCA input is provided, and its signal is digitised. Outputs are one pair of speaker binding posts and a variable RCA output (2 V, full range). Dimensions are 55 x 235 x 281 mm (H x W x D), and weight is 4 kg.

Engineering and use context

In the input section NuPrime uses its Ultra-Linear Class A Module (ULCAM) with ultra-low-noise JFETs, Nichicon KZ MUSE input coupling capacitors and OS-CON capacitors in the single-ended Class A modules. The Class D MOSFET switching stage operates at 600 kHz, and NuPrime quotes a 30% reduction in operating temperature.

Power comes from an ANC GaN supply. A dual-phase interleaved GaN Power Factor Correction circuit with Active Noise Cancellation sits in a 75 x 30 x 25 mm module rated at 600 W. Two GaN power modules of the same size, each rated at up to 250 W and 10 A peak, form a symmetrical dual supply with positive and negative rails for the differential amplifier circuit. Together they give 500 W and 20 A peak. According to NuPrime, this supply takes one quarter of the space and 20% of the weight of a transformer-based design. Custom power capacitors and 14 WIMA MKP and EPCOS MKP capacitors are used for power rail bypassing.

Volume is microprocessor-controlled in 99 steps of 0.5 dB, with an individual level stored for each input. Native DSD is supported through ASIO 2.1 and DoP, with a NuPrime driver for Windows and standard drivers on a Mac. A USB Type-A port carries S/PDIF data and 5 V power for an optional wireless receiver such as the NuPrime BTR-HD (Bluetooth aptX HD) or the LP10 NuPrime Edition. The IDA-9 also has a voltage select switch, and custom isolation feet and a remote control are included.

Pairing

Loudspeakers of 4 ohms or 8 ohms nominal impedance are suitable. The variable RCA output connects to a powered subwoofer or an external power amplifier. A computer with USB audio output, a CD transport or a streamer with coaxial or optical output works as the source.

Alternatives

NuPrime's IDA-8 is the lower-powered integrated amplifier with DAC on the same architecture.

Spezifikationen

  • Modellbezeichnung

    IDA-9

  • Typ

    Integrated Amplifier with DAC

  • Analogeingänge (symmetrisch)

    N/A

  • Analogeingänge (unsymmetrisch)

    1

  • Eingangsempfindlichkeit (mV)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • D/A-Wandlung

    Ja

  • Phono MM/MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    200

  • Ausgangsleistung (8Ω) (W)

    250

  • Ausgangsleistung (4Ω) (W)

    N/A

  • Verstärkung (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    10

  • Obere Grenzfrequenz +/- 3dB (Hz)

    50 000

  • Signal-Rausch-Abstand (dB)

    N/A

  • Klirrfaktor + Rauschen (%)

    0.005

  • Dämpfungsfaktor

    N/A

  • Abmessungen (mm)

    55 x 235 x 281

  • Gewicht (kg)

    4

  • Offizieller Link

Weitere Komponenten