Hifiverse

Vollverstärker - YBA Heritage A200S

Beschreibung, Bilder, technische Daten und Spezifikationen

YBA Heritage A200S
Bildquelle - (c) YBA

The A200S is an integrated amplifier with a built-in DAC from YBA, the French company founded in 1981 by Yves-Bernard André, whose initials form the brand name. It belongs to the Heritage line and was released in spring 2022. YBA paired the proven amplifier section of the earlier A200 with a new digital section, an upgraded DAC and a Bluetooth input. The A200S is now listed among YBA's discontinued models.

Key specs that matter

Output power is 110 W into 8 ohms and 165 W into 4 ohms. Frequency response is 20 Hz - 20 kHz (-0.5 dB), THD+N is below 0.04% (20 Hz - 20 kHz) and signal-to-noise ratio is above 95 dB. Inputs are one balanced XLR, five RCA, one optical digital, USB and Bluetooth. Outputs are one pair of speaker terminals and one RCA pre-out. The D/A converter is an AKM AK4493EQ. Its XMOS XU208 USB input accepts PCM up to 32 bit/768 kHz and DSD512. Bluetooth is a Qualcomm CSR8675 module (BT 5.0) with LDAC, aptX, aptX HD, AAC and SBC. Dimensions are 430 x 400 x 118 mm (W x D x H), and weight is 10 kg.

Engineering and use context

Power comes from a linear power supply with a 330 VA transformer. A switch on the rear panel disconnects power to the whole digital section when an analogue source is in use, and YBA states that this improves the performance of the analogue circuit. Besides a computer, the USB input accepts a digital streamer or network player, but not an external hard drive. The Bluetooth aerial is integrated in the chassis.

On the VIDEO input a bypass mode removes the preamplifier from the signal path, and the A200S then operates as a pure power amplifier. As on all YBA products, the chassis rests on three feet. Two of them are damped, and the third is of aluminium construction and acts as the vanishing point of vibrations.

Front panel controls are limited to the power switch, an input selector for the nine inputs and a volume control, with a display and IR sensor between them. It comes with the classic YBA remote control, which selects AMP, CD or AUX and can store and recall a volume level, dim the display and mute the output. An upgrade port on the rear is reserved for service and future improvements.

Pairing

The A200S is specified for 8 ohm or 4 ohm loudspeakers. Its pre-out connects a subwoofer, a separate power amplifier or active speakers. A turntable requires an external phono stage.

Alternatives

The A200 of 2018 is its predecessor, with the same output power, an AK4490EQ DAC limited to PCM 384 kHz and DSD256, and Bluetooth 4.1.

Spezifikationen

  • Modellbezeichnung

    Heritage A200S

  • Typ

    Integrated Amplifier with DAC

  • Analogeingänge (symmetrisch)

    1

  • Analogeingänge (unsymmetrisch)

    5

  • Eingangsempfindlichkeit (mV)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • D/A-Wandlung

    Ja

  • Phono MM/MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    N/A

  • Ausgangsleistung (8Ω) (W)

    110

  • Ausgangsleistung (4Ω) (W)

    165

  • Verstärkung (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    20

  • Obere Grenzfrequenz +/- 3dB (Hz)

    20 000

  • Signal-Rausch-Abstand (dB)

    >95

  • Klirrfaktor + Rauschen (%)

    <0.04

  • Dämpfungsfaktor

    N/A

  • Abmessungen (mm)

    430 x 400 x 118

  • Gewicht (kg)

    10

  • Offizieller Link

Weitere Komponenten