Hifiverse

Vollverstärker - Aries Cerat Genus

Beschreibung, Bilder, technische Daten und Spezifikationen

Aries Cerat Genus
Bildquelle - (c) Aries Cerat

The Genus is a single-ended triode (SET) integrated amplifier from Aries Cerat. With a footprint of 520 x 530 mm it is the most compact Aries Cerat design to date, and it takes key design ideas from the Concero 25 monoblock circuit. Aries Cerat describes it as a small stereo SET amplifier driving a bigger stereo SET in one chassis. The UK price is GBP 18,950.

Key specs that matter

Output is 25 W per channel in Class A1. Bandwidth is 11 Hz - 60 kHz, harmonic distortion is -64 dB H2 and -73 dB H3 at 1 W, and the noise floor is quoted as below 100 dB unweighted. The tube complement is two Elrog 845 and two Siemens E280F, with no local or global feedback. Inputs are four RCA pairs and one balanced XLR pair. Outputs are three pairs of speaker posts and a 6.2 mm headphone socket, and speaker impedance is user selectable from 1 to 16 ohms. Power consumption at idle is 400 W. Dimensions are 520 x 530 x 280 mm (W x D x H), and unpacked weight is 67 kg.

Engineering and use context

Only two gain stages are used. The input/driver stage is a small 0.7 W single-ended amplifier with the Siemens E280F super triode, loaded with a double C-core bifilar wound interstage transformer. No coupling capacitors are present anywhere in the circuit. Instead, the proprietary AC link coupling joins the first stage to the 845 output stage - the secondary winding of the small amplifier modulates the biasing circuits of the output stage. AC link is used in all the bigger Aries Cerat amplifiers.

Each of the four tubes has an independent power supply with its own choke filtered capacitor bank, and all four are supplied from dual 400 VA toroidal transformers, 800 VA in total. For the output stage supplies Aries Cerat uses its super capacitor film capacitors, with one to two orders of magnitude lower ESR and ESL than electrolytic or film types. Both Elrog 845 directly heated triodes have triple passively filtered filament supplies. Bias of the driver and output tubes is adjusted on the fly with the built-in bias meter, which also gives a constant readout of tube current. A self-resetting soft start builds up the high voltages slowly at switch-on.

Headphones are driven directly from the same output transformers as the speaker outputs, and the socket is switchable between high and low output impedance. Volume, input selection and balance use a built-in relay system with the supplied remote control.

Pairing

The output impedance is pre-configured on order and set with the impedance selector to the nominal impedance of the speaker. Balanced sources connect to the XLR input.

Alternatives

The Ianus Protos is a smaller Aries Cerat integrated amplifier with a single-stage TriodeFet circuit and 20 W into 8 ohms.

Spezifikationen

  • Modellbezeichnung

    Genus

  • Typ

    Integrated Amplifier

  • Analogeingänge (symmetrisch)

    N/A

  • Analogeingänge (unsymmetrisch)

    N/A

  • Eingangsempfindlichkeit (mV)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • D/A-Wandlung

    k. A.

  • Phono MM/MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    N/A

  • Ausgangsleistung (8Ω) (W)

    N/A

  • Ausgangsleistung (4Ω) (W)

    N/A

  • Verstärkung (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Signal-Rausch-Abstand (dB)

    N/A

  • Klirrfaktor + Rauschen (%)

    N/A

  • Dämpfungsfaktor

    N/A

  • Abmessungen (mm)

    520 x 530 x 280

  • Gewicht (kg)

    67

  • Offizieller Link