Hifiverse

Vollverstärker - Fezz Audio Fezz Alfa Lupi

Beschreibung, Bilder, technische Daten und Spezifikationen

Fezz Audio Fezz Alfa Lupi
Bildquelle - (c) Fezz Audio

The Fezz Alfa Lupi is a stereo tube integrated built by Fezz Audio, a Polish company based in Juchnowiec Koscielny near Bialystok. It has been the entry point to the brand's tube amplifier range for years, and the Evolution revision added anti-vibration feet matched to the weight of the chassis together with a backlit Fezz logo. In late 2025 Fezz announced that the new Luna EVO and Luna Mini EVO would replace the long-running Alfa Lupi and Silver Luna.

Key specs that matter

Maximum output is 2 x 10 W from a push-pull stage working in class AB1. Separate 4 ohm and 8 ohm speaker taps are fitted, and Fezz advises using the 8 ohm tap for 6 ohm loudspeakers. Frequency response spans 20 Hz to 120 kHz at -3 dB, with total harmonic distortion under 0.3 percent. Three RCA line inputs are standard, and power consumption is 90 W. Fezz lists a net weight of 15.2 kg and dimensions of 355 x 380 x 175 mm including the tubes.

Engineering and use context

The amplifier runs on four PCL86 tubes, a triode-pentode type that combines a small-signal section and an output pentode in one glass envelope. An automatic bias module keeps the operating point stable, so replacement tubes should be supplied as factory-matched pairs or quads. Toroidal power and output transformers sit on the top plate, the output transformers in their own housings on either side of the tube rows. The front panel carries only a volume potentiometer and a rotary source selector. On the back are the RCA inputs, speaker terminals for both channels, the main fuse holder rated 3.15 A slow-blow, an IEC socket, the mains switch and a signal ground switch for hum problems. Buyers can order a handset for remote operation, a Bluetooth receiver board, a pre-out for a subwoofer, a mesh guard over the tubes, an extra pre-in socket and a matched upgrade tube set.

Pairing

With the optional HT pre-in input fitted, the Alfa Lupi works as a stereo power amplifier fed by a standalone preamplifier that has volume adjustment, or by a receiver fitted with pre-out, but Fezz warns that CD players, DACs and similar sources must never go straight into that input. The sub-out option feeds an active subwoofer. Records require an outboard MM or MC preamplifier, and speakers must be connected before power-up.

Alternatives

The Fezz Luna Mini is the brand's compact single-ended class A integrated model, using two EL34 and two 12AX7.

Spezifikationen

  • Modellbezeichnung

    Fezz Alfa Lupi

  • Typ

    Integrated Amplifier

  • Analogeingänge (symmetrisch)

    N/A

  • Analogeingänge (unsymmetrisch)

    N/A

  • Eingangsempfindlichkeit (mV)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • D/A-Wandlung

    k. A.

  • Phono MM/MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    N/A

  • Ausgangsleistung (8Ω) (W)

    2 x 10

  • Ausgangsleistung (4Ω) (W)

    N/A

  • Verstärkung (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    20

  • Obere Grenzfrequenz +/- 3dB (Hz)

    120 000

  • Signal-Rausch-Abstand (dB)

    N/A

  • Klirrfaktor + Rauschen (%)

    < 0,3

  • Dämpfungsfaktor

    N/A

  • Abmessungen (mm)

    355x380x175

  • Gewicht (kg)

    15.2

  • Offizieller Link