Hifiverse

Vollverstärker - Rega ELEX MK4

Beschreibung, Bilder, technische Daten und Spezifikationen

Rega ELEX MK4
Bildquelle - (c) Rega

Elex MK4 is a stereo integrated amplifier from Rega, launched on 14 April 2023 at GBP 1,199. In the British company's amplifier range it sits above the Io and Brio and below the Elicit MK5 and Aethos. Besides line and moving magnet phono inputs it has a built-in DAC, a pre-amplifier output, a record output and a headphone output, all housed in a new custom design case that matches the rest of the Rega range.

Key specs that matter

Power output is 72 W per channel into 8 ohms and 90 W per channel into 6 ohms (at rated 230/115 V supply). Inputs are one MM phono input (1.6 mV, 47 kohms in parallel with 220 pF), four line inputs (164 mV, 10 kohms), one isolated coaxial S/PDIF input (0.5 V, 75 ohms) and one Toslink optical input. Both digital inputs accept 16 to 24 bit at 32, 44.1, 48, 88.2, 96, 176.4 and 192 kHz. Power amplifier gain is 31.6 dB. THD+N is typically 0.005% at 1 kHz on the line inputs (1 dB below clip into 8 ohms, 22 Hz - 22 kHz, A-weighted). Bandwidth at 80 W into 8 ohms is 10 Hz (-1 dB) to 65 kHz (-3 dB) on the line inputs and 15 Hz - 65 kHz (-3 dB) on the phono input, with RIAA accuracy better than ±0.5 dB from 100 Hz to 20 kHz. Record output level is 164 mV and pre-amplifier output level is 625 mV. Dimensions are 432 x 82 x 340 mm (W x H x D, depth includes the loudspeaker terminals), and weight is 11 kg.

Engineering and use context

Rega uses its Class A/B power amplifier circuit with Sanken output transistors. A quiet multi-stage linear supply powers it, and the supply rails for the digital and analogue sections are galvanically isolated. Discrete circuitry, high-quality relays and polypropylene capacitors are used throughout, and the entire case acts as the heat sink.

Inside the MM stage the RIAA equalisation is split into two stages to minimise interaction. Its digital section is based closely on the Rega DAC-R circuit, with a Wolfson S/PDIF receiver IC, a Wolfson DAC and a Rega designed discrete line-driver circuit. To keep capacitors in the signal path to a minimum, the power amplifier output is DC coupled. Protection comprises a thermal cut-out, fold-back short circuit protection outside the audio signal path and DC protection. On the front panel, the headphone output has a source impedance of 109 ohms, and the output mute relay switches the speakers off when headphones are connected. A motorised volume control and a supplied mini remote complete the controls.

Pairing

The speaker terminals are intended for 4-16 ohm loudspeakers. A moving coil cartridge requires an external MC phono stage such as the Rega Fono MC MK4. The pre-amplifier output can drive additional power amplifiers or a subwoofer.

Alternatives

The Rega Elicit MK5 is the next integrated amplifier up, rated at 105 W per channel into 8 ohms.

Spezifikationen

  • Modellbezeichnung

    ELEX MK4

  • Typ

    Integrated Amplifier with Phono

  • Analogeingänge (symmetrisch)

    N/A

  • Analogeingänge (unsymmetrisch)

    4 + 1 (Phono)

  • Eingangsempfindlichkeit (mV)

    164 + 1.6 (Phono)

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    10 000

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • D/A-Wandlung

    k. A.

  • Phono MM/MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    47 000

  • Ausgangsleistung (8Ω) (W)

    72

  • Ausgangsleistung (4Ω) (W)

    N/A

  • Verstärkung (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    10

  • Obere Grenzfrequenz +/- 3dB (Hz)

    65 000

  • Signal-Rausch-Abstand (dB)

    N/A

  • Klirrfaktor + Rauschen (%)

    0.005

  • Dämpfungsfaktor

    N/A

  • Abmessungen (mm)

    432 x 82 x 340

  • Gewicht (kg)

    11

  • Offizieller Link

Weitere Komponenten