Hifiverse

Vollverstärker - Gryphon Audio DIABLO 300

Beschreibung, Bilder, technische Daten und Spezifikationen

Gryphon Audio DIABLO 300
Bildquelle - (c) Gryphon Audio

The Diablo 300 is a stereo integrated amplifier from Gryphon Audio Designs of Denmark and the successor to the original Diablo. Its casework follows the Mephisto power amplifier, with a front of metal and black acrylic. Two optional modules extend it, an MM/MC phonostage and a PCM/DSD DAC.

Key specs that matter

Output power is 300 W RMS per channel into 8 ohms, 600 W into 4 ohms and 950 W into 2 ohms. THD+N is below 1% at 300 W and below 0.05% at 50 W. Gryphon specifies a bandwidth of 0 - 350 kHz (-3 dB), gain of +38 dB and input sensitivity of 0.617 V. Input impedance is 40 kOhm balanced and 20 kOhm single-ended, and output impedance is 0.019 ohm (20 Hz - 20 kHz). A-weighted noise is below -88 dBu, and channel separation is above 120 dB. On the rear are two XLR and three RCA inputs, two RCA outputs (tape and sub), a 12 V link and an input for an external infrared receiver. Power supply capacity is 2 x 68,000 µF. Consumption is below 0.5 W in standby, 200 W at idle and 1900 W maximum. The chassis measures 480 x 235 x 460 mm (W x H x D) and weighs 38.1 kg without modules.

Engineering and use context

Both channels are in true dual mono configuration, with a dual mono Holmgren toroidal transformer that has a vacuum-treated core and windings. The DC-coupled output stage runs with high Class A/B bias, and the circuit uses zero negative feedback. Volume is set by a microprocessor-controlled, 43-step, fully balanced relay attenuator, and a large vacuum fluorescent display shows the settings. Gryphon uses military-spec dual-layer and four-layer circuit boards with copper traces up to 105 microns, polypropylene coupling capacitors in parallel with electrolytic capacitors, and local shunt regulators for noise suppression. Compared with its predecessor, it has twice the heatsink area.

Inside the optional DAC module is a Sabre ES9018 converter. It accepts PCM up to 32-bit/384 kHz over USB, with DSD512 on Windows and DSD128 on Mac and Linux. AES, optical and two S/PDIF inputs accept PCM up to 24-bit/192 kHz.

Pairing

Input 3 can be set as a dedicated AV input that bypasses the volume control, for the front channels of a surround processor. The sub output, at +12 dB, connects an active subwoofer or a second power amplifier. Other Gryphon models connect over the 12 V link.

Alternatives

The Gryphon Diablo 120 is the smaller integrated amplifier in the same family, rated at 120 W into 8 ohms and 440 W into 2 ohms.

Spezifikationen

  • Modellbezeichnung

    DIABLO 300

  • Typ

    Integrated Amplifier

  • Analogeingänge (symmetrisch)

    2

  • Analogeingänge (unsymmetrisch)

    3

  • Eingangsempfindlichkeit (mV)

    390

  • Eingangsimpedanz (symmetrisch) (Ω)

    40 000

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    20 000

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    0.019

  • D/A-Wandlung

    k. A.

  • Phono MM/MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    N/A

  • Ausgangsleistung (8Ω) (W)

    2 x 300

  • Ausgangsleistung (4Ω) (W)

    2 x 600

  • Verstärkung (dBu)

    38

  • Untere Grenzfrequenz +/- 3dB (Hz)

    20

  • Obere Grenzfrequenz +/- 3dB (Hz)

    20 000

  • Signal-Rausch-Abstand (dB)

    N/A

  • Klirrfaktor + Rauschen (%)

    < 0,05

  • Dämpfungsfaktor

    N/A

  • Abmessungen (mm)

    480 x 235 x 460

  • Gewicht (kg)

    38.1

  • Offizieller Link