Hifiverse

Vollverstärker - Vinshine Audio Vinshine x Kinki Studio DAZZLE

Beschreibung, Bilder, technische Daten und Spezifikationen

Vinshine Audio Vinshine x Kinki Studio DAZZLE
Bildquelle - (c) Vinshine Audio

The DAZZLE is a solid-state stereo integrated amplifier developed jointly by Vinshine Audio of Singapore and the Chinese maker Kinki Studio, and the two companies announced it as their flagship integrated amplifier. It was unveiled at Hi End Asia Singapore 2025 with a listed price of SGD 10,994, around GBP 6,450. Compared with Kinki Studio's own designs, this Vinshine edition adds cryogenically treated ShoonTH parts and Exact Express FLAME internal wiring.

Key specs that matter

Rated output is 300 W per channel into 8 ohms and 560 W per channel into 4 ohms, both channels driven. Frequency response is 10 Hz - 30 kHz, THD+N is 0.0054% and signal-to-noise ratio is greater than 115 dB (1 kHz). Inputs are three RCA (50 kohms) and two XLR (100 kohms) line-level connections plus a preamp bypass input. Two pairs of 4 mm binding posts accept spade connectors. Dimensions are 440 x 410 x 170 mm including spikes, and weight is 33 kg. Power consumption is 0.8 W in standby and up to 1600 W at maximum output.

Engineering and use context

At its core is Kinki Studio's newly developed SSCLD (Super Symmetry Current Linear Drive) module, a proprietary topology designed for wide bandwidth, low distortion and linear response. Its output stage is a high-current EXICON MOSFET array with twelve devices per channel. An independent voltage servo eliminates DC offset and removes the need for capacitors in the signal path. In the preamp section the signal path is ultra-short, with a direct connection layout, and all circuitry is mounted on 3U gold-plated PCBs.

Eight independent power supplies serve the control, display, protection, preamplification and power amplification stages. Dual 800 W low magnetic-loss toroidal transformers work in a dual-mono configuration. Each channel has a capacitor network of Vishay MKP film capacitors and reservoir capacitors custom-tuned by Kinki Studio.

Kinki Studio's 79 Series provides the mechanical structure. A suspended isolation system separates the main chassis from its base, and the feet are directional energy-drain spikes. Internal AC, DC, signal and loudspeaker wiring is Exact Express FLAME Series cable. Both the ShoonTH fuse and the AC inlet are cryogenically treated at -196 °C. ShoonTH also supplies the speaker binding posts, made of oxygen-free copper, cryo-treated and plated in layers of copper, silver, palladium and gold.

Pairing

A separate preamplifier or AV processor can use the DAZZLE as a stereo power amplifier through the preamp bypass input. Balanced sources connect to the two XLR inputs. Loudspeakers with 4 ohm nominal impedance are within the rated output.

Alternatives

Vinshine Audio has no other integrated amplifier under its own name, as the other integrated models it sells carry the Kinki Studio or CHoco brands.

Spezifikationen

  • Modellbezeichnung

    Vinshine x Kinki Studio DAZZLE

  • Typ

    Integrated Amplifier

  • Analogeingänge (symmetrisch)

    2

  • Analogeingänge (unsymmetrisch)

    3

  • Eingangsempfindlichkeit (mV)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    100 000

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    50 000

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • D/A-Wandlung

    k. A.

  • Phono MM/MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    N/A

  • Ausgangsleistung (8Ω) (W)

    300

  • Ausgangsleistung (4Ω) (W)

    560

  • Verstärkung (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    10

  • Obere Grenzfrequenz +/- 3dB (Hz)

    30 000

  • Signal-Rausch-Abstand (dB)

    >115

  • Klirrfaktor + Rauschen (%)

    0.0054

  • Dämpfungsfaktor

    N/A

  • Abmessungen (mm)

    440 × 170 x 410

  • Gewicht (kg)

    33

  • Offizieller Link