The CS100 is an integrated amplifier from MORE audio, the brand of MORE technic Sp. z o.o. of Zabrze, Poland. It was the company's debut product and is now joined by the CS200. Founder and chief designer Tomasz Dębski has worked on effects units and controllers for musicians and on audio amplifiers, and he is also a guitarist. Co-founder Jan Siwy is a designer with experience in electronics design, production and management. The CS100 sells for PLN 19,700 in the maker's shop, and the warranty is three years with manufacturer service.
Key specs that matter
Output power is 100 W RMS into 8 ohms and 200 W RMS into 4 ohms. Inputs are four unbalanced RCA line inputs, with an input sensitivity of 430 mV RMS (100 W/8 ohms) and an input impedance of 100 kohms. Volume runs from 0 dB to -64 dB in 1 dB steps. Frequency response is 5 Hz - 120 kHz (-1 dB), and THD+N is below 0.05%. Output impedance is quoted as -150 milliohms. The chassis measures 340 x 180 x 330 mm (W x H x D) and weighs 15 kg. Supplied are a remote control, an IEC power cable, the owner's manual and a warranty card.
Engineering and use context
All four inputs have identical parameters and accept line-level signals from sources such as a CD player or DAC. Volume and input selection are available from the infrared remote and from a keypad on the top panel with STANDBY, SELECT, DOWN and UP keys. Rows of LEDs on the front panel show the selected input and the volume level, and an ambient light sensor automatically adjusts the brightness of all front-panel indicators. After activation the STANDBY LED flashes for about 20 seconds while the amplifier prepares to switch on. The remote has MUTE, POWER, input keys 1 to 4 and two volume keys. A mains switch on the rear panel cuts power completely. MORE audio states that the amplifier has a number of protection circuits and automatic control to ensure correct operation. The speaker outputs take banana plugs or spades, and the manual specifies cables of at least 2.5 mm2. For ventilation the amplifier needs at least 10 cm of free space at the sides and 15 cm above the top cover.
Pairing
Speakers with a minimum impedance of 4 ohms are required. Sources must have unbalanced RCA line outputs. A turntable requires an external phono stage.
Alternatives
The CS200 is MORE audio's other integrated amplifier, with two RCA and two XLR inputs, galvanic input isolation and a volume range down to -80 dB.