Hifiverse

Vollverstärker - Connected-Fidelity CDV-2 NW

Beschreibung, Bilder, technische Daten und Spezifikationen

Connected-Fidelity CDV-2 NW
Bildquelle - (c) Connected-Fidelity

The CDV-2 NW is a 2-way tube electronic crossover from the Reference Series of Concert Fidelity, the Japanese company that Masataka Tsuda started in 1987. Tsuda designs and builds all of the products at its workshop in Nagano prefecture. The NW type is the crossover version of the CDV-2, and the SP type on the same platform is a tube bi-amp splitter. No list price is published.

Key specs that matter

Input is one pair of single-ended RCA connectors. Two output pairs follow, a high output and a low output, both single-ended RCA and each with an individual output level control. Configuration is stereo 2-way or mono 3-way. Crossover filters have slopes of -6 dB or -12 dB per octave and are full custom-made. A 30-second mute is active at power on. Tube complement is three 12AU7/ECC82 for the filter buffer amplifier and one 6CA4/EZ81 for rectification. Dimensions are 450 x 100 x 310 mm (W x H x D), and net weight starts at 10 kg.

Engineering and use context

According to Concert Fidelity, the electronic crossover divides the audio spectrum of a multi-way speaker system between the various amplifiers and drive units. Both CDV-2 types share the input, the tube complement and the chassis, and they differ in the output section. Tube swapping is possible on the 12AU7 buffer stage, but Concert Fidelity products are supplied without tubes.

Mains versions are available for 100 V (50/60 Hz), 110-120 V (60 Hz), 220-230 V (50 Hz) and 240 V (50 Hz). A transformer dedicated to the destination country is used, operation at other voltages is not guaranteed, and failures outside the destination country are not covered by the warranty.

Pairing

A preamplifier with a single-ended RCA output, such as the Concert Fidelity CF-080LSX4, is required ahead of the crossover. A stereo 2-way system requires four amplifier channels with RCA inputs, such as four ZL-120FX2 monoblocks. Loudspeakers with separate terminals for each drive unit and no internal passive crossover are required.

Alternatives

The CDV-2 SP is the Concert Fidelity tube bi-amp splitter on the same chassis, with two output pairs and Output 1, Output 2 or Output 1 + 2 modes.

Spezifikationen

  • Modellbezeichnung

    CDV-2 NW

  • Typ

    Network Integrated Amplifier

  • Analogeingänge (symmetrisch)

    N/A

  • Analogeingänge (unsymmetrisch)

    1

  • Eingangsempfindlichkeit (mV)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • D/A-Wandlung

    k. A.

  • Phono MM/MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    N/A

  • Ausgangsleistung (8Ω) (W)

    N/A

  • Ausgangsleistung (4Ω) (W)

    N/A

  • Verstärkung (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Signal-Rausch-Abstand (dB)

    N/A

  • Klirrfaktor + Rauschen (%)

    N/A

  • Dämpfungsfaktor

    N/A

  • Abmessungen (mm)

    450 x 100 x 310

  • Gewicht (kg)

    10

  • Offizieller Link