Hifiverse

Vollverstärker - Staccato Audio Black Unique BU-01

Beschreibung, Bilder, technische Daten und Spezifikationen

Staccato Audio Black Unique BU-01
Bildquelle - (c) Staccato Audio

Black Unique BU-01 is a dual-mono Class A integrated amplifier from Staccato Audio, a small Polish company owned by designer Jakub Honkisz. Before complete amplifiers the brand made discrete operational amplifier modules under the OSH (Open Sound Hybrid) name. According to Staccato, the Black Unique name refers to the black background in music, the silence in which room acoustics become perceptible. Each unit is built to order in about six weeks, using one batch of components for close pairing of parts. Ten colour configurations of chassis and knob are offered. Announced at EUR 14,990, it sells for USD 15,990.

Key specs that matter

Circuit topology is single-ended Class A. Rated output is 2 x 52 W RMS into 8 ohms and 2 x 78 W RMS into 4 ohms. Gain is 26 dB. Frequency response is 1 Hz - 150 kHz (-0.1 dB to -3 dB), and THD+N is 0.02% (20 Hz - 20 kHz, 4 ohms, 1 W). Signal-to-noise ratio is 91 dB, with a noise level of -91 dBV. Six pairs of RCA inputs on Furutech FT-903 sockets have an input impedance of 24.5 - 25.5 kohms (direct input 25 kohms). Power consumption is 275 W, or 0.9 W in standby, and inrush power is 650 W for 1 s. Dimensions are 450 x 413 x 180 mm (W x D x H), and weight is 30 kg.

Engineering and use context

Inside, the mains transformer sits in a proprietary triple electromagnetic shielding system. Staccato explains that in Class A the high idle current generates significant electromagnetic radiation. Elimination of internal wiring, as a potential source of signal loss and antenna effects, was a design priority. A distributed ground network with hum-isolating resistors is used to reach a low self-noise floor. In Class A operation the output transistors are continuously active.

Volume is set by a passive attenuator with 64 steps of 1 dB. One pair of regulated RCA pre-outs is also on Furutech FT-903 sockets. There is no phono stage and no XLR input.

Pairing

A separate phono stage is required for vinyl playback. Balanced sources need XLR to RCA adapters. The regulated pre-out accepts a power amplifier or an active subwoofer.

Alternatives

Staccato Audio has no other integrated amplifier in its range.

Spezifikationen

  • Modellbezeichnung

    Black Unique BU-01

  • Typ

    Integrated Amplifier

  • Analogeingänge (symmetrisch)

    N/A

  • Analogeingänge (unsymmetrisch)

    6

  • Eingangsempfindlichkeit (mV)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • D/A-Wandlung

    k. A.

  • Phono MM/MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    N/A

  • Ausgangsleistung (8Ω) (W)

    2 x 82 (2 x 58 RMS)

  • Ausgangsleistung (4Ω) (W)

    N/A

  • Verstärkung (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Signal-Rausch-Abstand (dB)

    N/A

  • Klirrfaktor + Rauschen (%)

    N/A

  • Dämpfungsfaktor

    N/A

  • Abmessungen (mm)

    N/A

  • Gewicht (kg)

    N/A

  • Offizieller Link