The Assolo is an integrated amplifier from Omega Audio Concepts of Colle Umberto, in the province of Treviso, Italy. It is the first amplifier in which the company put the power supply and the signal circuits into a single chassis, and the name, Italian for a solo performance, refers to that one-box layout. It sits in an amplifier range that also includes the Mono DNA, Accordo and Stream Power models.
Key specs that matter
Rated output is 100 W per channel into 8 ohm and 160 W into 4 ohm. The input board comes in two versions, either three RCA inputs or a pair of RCA inputs with one balanced XLR, all with an input impedance of 10 kohm. Noise sits 100 dB below the signal by the maker's figure. Volume is set digitally in 0.5 dB steps. The case measures 410 x 410 x 100 mm and weighs 30 kg, and maximum power draw from the mains is 300 W. Finishes are grey, black and titanium, and custom paint is available on request.
Engineering and use context
The aluminium case is cut from a solid block on CNC equipment, and the main circuit board sits physically apart from the power supply. The toroidal transformers are placed at the front of the chassis and isolated both mechanically and electromagnetically. One transformer feeds the preamplifier and volume control, with independent left and right rails, and separate transformers serve the left and right output stages, so every supply starts from its own winding. Power-on goes through a soft-start circuit, and the IEC inlet carries a fuse. The analogue signal ground is kept separate from the power ground. SMD resistors and capacitors with 0.1% tolerance are used in the preamplifier and amplifier stages, no series capacitors sit in the signal path, and the digital volume control adds just one resistor to it. Internal loudspeaker leads are kept to about 6 cm. Control comes from an infrared remote and from a separate 5-inch touchscreen display that the amplifier powers over USB-C.
Pairing
Since the circuit is coupled without capacitors, Omega warns against connecting any source whose continuous DC output voltage exceeds 10 mV in either direction, so a source with a clean, DC-free output is required. Owners with a balanced source should order the version with the XLR input. Because the rating rises into 4 ohm, loudspeakers with a 4 ohm load suit it as well as 8 ohm designs. Within the same catalogue the DNA CD Player can act as the source, and Omega wires its own systems with Elements conductors.
Alternatives
Omega also builds the Accordo, a mono integrated system in which each channel uses one chassis for the power supply and another for amplification.