Hifiverse

Vollverstärker - Art Audio Lab Amati

Beschreibung, Bilder, technische Daten und Spezifikationen

Art Audio Lab Amati
Bildquelle - (c) Art Audio Lab

The Luthier Series is a limited range of tube components from S.A.Lab, short for Sound Analysis Laboratory, the Russian company that its designer Alexey Syomin founded in 2002. Each model carries the name of a celebrated violin maker. Two units opened the range, the Amati integrated amplifier and the Stradivarius phono stage, priced at EUR 11,000 each. A Guarneri and a Vuillaume were announced as further members, and S.A.Lab planned no more than six or seven examples of each model.

Key specs that matter

Output power of the Amati is 8 W per channel into 8 ohms and 16 W into 4 ohms. Per channel it uses a pair of 6F6 output pentodes with 6SL7 double triodes in the driver stage, and the supply has a 5U4G tube rectifier. There are three line inputs and one pair of speaker outputs. Signal-to-noise ratio is 97 dB, distortion is no higher than 0.2% across the audible band and power consumption is 105 W. It weighs 30 kg. The Stradivarius has MM and MC inputs with sensitivities of 5 mV and 0.3 mV, reaches 95 dB signal-to-noise at 1 V output and weighs 28 kg.

Engineering and use context

Both units share one chassis size and one design in polished stainless steel. Brass plates cover the front and rear, engraved tags sit in front of the tubes and the winding ratios are printed on the transformer covers. VU meters are mounted on the fascia. Syomin designs and winds the transformers for each project himself, on iron cores sourced from Japan.

Inside the Stradivarius, a single-ended circuit uses four transformers, two output transformers, one power transformer and a choke, and its supply is rectified by a 5C4S tube. Its 6SN7 and 6SL7 double triodes relate it to the Paris phono stage of the earlier Capital Series. All circuits are wired point to point, with no printed circuit boards.

New-old-stock parts make up much of the parts list. Among them are 1950s tubes from the Moscow electron-tube factory, sealed with signed military-grade quality certificates, as well as Black Gate and Jensen capacitors and Vishay resistors. The scarcity of Black Gate capacitors is one reason for the small run, since the designer held only enough for the planned quantity. Syomin estimates that a rectifier tube needs replacing about every 500 hours.

Pairing

The matching phono stage for the Amati is the Stradivarius. Loudspeakers with high sensitivity are required. CD players, tape decks and other line-level sources connect directly to the line inputs.

Alternatives

The S.A.Lab Thunderbird Integrated is a tube integrated amplifier with four 6550 pentodes in a push-pull output stage and five line inputs.

Spezifikationen

  • Modellbezeichnung

    Amati

  • Typ

    Integrated amplifier

  • Analogeingänge (symmetrisch)

    N/A

  • Analogeingänge (unsymmetrisch)

    3

  • Eingangsempfindlichkeit (mV)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • D/A-Wandlung

    k. A.

  • Phono MM/MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    N/A

  • Ausgangsleistung (8Ω) (W)

    2 x 8

  • Ausgangsleistung (4Ω) (W)

    2 x 16

  • Verstärkung (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    5

  • Obere Grenzfrequenz +/- 3dB (Hz)

    25000

  • Signal-Rausch-Abstand (dB)

    97

  • Klirrfaktor + Rauschen (%)

    0,2

  • Dämpfungsfaktor

    N/A

  • Abmessungen (mm)

    226 x 420 x 310

  • Gewicht (kg)

    30

  • Offizieller Link