Hifiverse

Vollverstärker - Circle Labs Audio A200

Beschreibung, Bilder, technische Daten und Spezifikationen

Circle Labs Audio A200
Bildquelle - (c) Circle Labs Audio

The A200 is a hybrid integrated amplifier from Circle Labs, a company based in Krakow, Poland, and founded by engineer Krzysztof Wilczyński and designer Krzysztof Lichoń. Circle Labs lists it as its flagship integrated amplifier. A minimalist preamplifier with an ECC88-family tube is combined with a transistor power amplifier in the maker's own Circle Power technology. It replaced the earlier A100 integrated.

Key specs that matter

Output power is 120 W RMS into 8 ohms and 200 W RMS into 4 ohms. Frequency response is 10 Hz - 130 kHz (-3 dB), and gain is 35 dB. Input sensitivity is 0.7 V for full power, with an input impedance of 33 kOhm. Inputs comprise one balanced XLR pair and three pairs of RCA line inputs, and a pre out is provided. Power consumption is under 0.1 W in standby, 70 W at idle and 400 W at maximum. The chassis measures 430 x 376 x 176 mm (W x D x H), with a net weight of 23 kg and a shipping weight of 28.5 kg.

Engineering and use context

Circle Labs gives the signal path as volume control, then a single-ended tube preamplifier, then the Circle Power amplifier. Volume is set by a Khozmo resistor ladder, with 0.1 percent tolerance resistors switched by relays. The preamplifier is a single stage on one ECC88-family tube operating with fixed bias, and the user manual specifies the ECC8100 as the replacement type, selected in pairs. Each channel has its own tube, and the section runs from stabilised power supplies with polypropylene capacitors.

In the Circle Power stage, an asymmetrical input stage drives current-controlled bipolar output transistors. Circle Labs quotes a low output impedance and a high damping factor for this stage. The amplifier uses dual-mono construction, with separate toroidal transformers and power supplies holding 200,000 µF of total capacitance. A 30-second warm-up runs after switch-on, with the volume reset to 00. The supplied remote control has volume up, volume down, mute and display brightness buttons, and the box also contains covers for the amplifier and the remote.

Pairing

The XLR input accepts a balanced source and the RCA inputs accept line-level sources. A separate phono stage is required for vinyl. The pre out allows connection of a separate power amplifier.

Alternatives

The Circle Labs AS100 is a transistor integrated amplifier rated at 65 W into 8 ohms and 110 W into 4 ohms.

Spezifikationen

  • Modellbezeichnung

    A200

  • Typ

    Integrated Amplifier

  • Analogeingänge (symmetrisch)

    1

  • Analogeingänge (unsymmetrisch)

    3 + 1 (pre out)

  • Eingangsempfindlichkeit (mV)

    700

  • Eingangsimpedanz (symmetrisch) (Ω)

    33 000

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    33 000

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • D/A-Wandlung

    k. A.

  • Phono MM/MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    N/A

  • Ausgangsleistung (8Ω) (W)

    120

  • Ausgangsleistung (4Ω) (W)

    200

  • Verstärkung (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    10

  • Obere Grenzfrequenz +/- 3dB (Hz)

    130 000

  • Signal-Rausch-Abstand (dB)

    N/A

  • Klirrfaktor + Rauschen (%)

    N/A

  • Dämpfungsfaktor

    N/A

  • Abmessungen (mm)

    430 x 376 x 176

  • Gewicht (kg)

    23

  • Offizieller Link

Weitere Komponenten