Hifiverse

Vollverstärker - Western Electric 91E

Beschreibung, Bilder, technische Daten und Spezifikationen

Western Electric 91E
Bildquelle - (c) Western Electric

The Type 91E is a tube integrated amplifier from Western Electric, made in the USA at the Rossville Works in Rossville, Georgia, where the company also produces its 300B triodes by hand. Its name goes back to the 91A, which Western Electric commissioned in 1936 through ERPI, its film sound subsidiary, for the wall-mounted Type 500A cinema amplifier set, with a 300A tube giving about 8 W. US prices are USD 7,999 in Champagne or Black and USD 8,499 in Nickel.

Key specs that matter

Output power is 2 x 20 W into 4 or 8 ohms at 10% THD, 2 x 16 W at 5% THD and 2 x 14 W at 3% THD. Six audio inputs are provided, among them an MM/MC phono stage, a CD line input and Bluetooth. MM sensitivity is 0.75 mV at 47 kOhms and 100 pF, MC sensitivity is 70 µV, and RIAA accuracy is ±0.5 dB from 30 Hz to 20 kHz. Signal-to-noise ratio is 83 dB(A) for MM and 73 dB(A) for MC (10 W into 4 ohms). The CD input has 0.27 V sensitivity, 20 kOhms impedance, 15 Hz - 32 kHz (-3 dB) response and 101 dB(A) S/N. Bluetooth 4.2 supports SBC, MP3, AAC, FastStream and aptX, up to 96 kHz / 16-bit. Dimensions are 48 x 38 x 28 cm, weight is 22.2 kg, and consumption is 160 W in operation and 0.3 W in standby.

Engineering and use context

Western Electric specifies the 91E as a Class A single-ended triode (SET) design with zero negative feedback. Its output stage uses one matched pair of new production Western Electric 300B tubes, with two pre-installed ECC81 tubes in the pre-amplifier. Power comes from a patented, fully linear steered current source (SCS) controlled by the voltage of the output tube. Microprocessors bias the 300B pair automatically each time the amplifier is powered on. A standard 8-ohm output transformer block is installed, and optional 4-ohm or 16-ohm blocks can be exchanged for it.

Volume is set by a stepped logarithmic attenuator built as a ladder of discrete resistors. A dimmable colour display shows the selected input, the attenuator level and a VU meter, and an infrared remote control is included. MC input impedance is adjustable with Phono Load plugs. USB and Ethernet ports are for service access only. The chassis is machined aluminium, and mains settings are 100, 115 and 230 V. Warranty is 90 days, extended to three years after registration.

Pairing

A turntable with an MM or MC cartridge connects directly to the phono stage. In pre-amp configuration the 91E has a 600-ohm balanced XLR output for an external power amplifier. A headphone output is provided.

Alternatives

Western Electric has no other integrated amplifier in its range.

Spezifikationen

  • Modellbezeichnung

    91E

  • Typ

    Integrated Amplifier with Phono

  • Analogeingänge (symmetrisch)

    N/A

  • Analogeingänge (unsymmetrisch)

    6

  • Eingangsempfindlichkeit (mV)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    47 000 (MM) + 1 000 000 (MC) + 20 000 (CD)

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • D/A-Wandlung

    Ja

  • Phono MM/MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    N/A

  • Ausgangsleistung (8Ω) (W)

    2 x 20

  • Ausgangsleistung (4Ω) (W)

    2 x 20

  • Verstärkung (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    30

  • Obere Grenzfrequenz +/- 3dB (Hz)

    20 000

  • Signal-Rausch-Abstand (dB)

    83 (MM) + 73 (MC) + 101 (CD)

  • Klirrfaktor + Rauschen (%)

    N/A

  • Dämpfungsfaktor

    N/A

  • Abmessungen (mm)

    480 x 380 x 280

  • Gewicht (kg)

    22.2

  • Offizieller Link