Hifiverse

Vollverstärker - Lindemann 885

Beschreibung, Bilder, technische Daten und Spezifikationen

Lindemann 885
Bildquelle - (c) Lindemann

The 885 Integrated Power Amplifier is a stereo integrated amplifier from Lindemann audiotechnik of Krailling, Germany, and part of the company's 800 Series. Lindemann builds it in Germany in limited quantities. The design is fully balanced, and the connector panel has analogue line inputs only, with no digital inputs.

Key specs that matter

Rated output is 140 W per channel into 8 ohms and 260 W per channel into 4 ohms, and the minimum speaker impedance is 2 ohms. Inputs are two balanced XLR and three single-ended RCA. Input sensitivity is 500 mV balanced (200 W into 4 ohms), input impedance is 20 kohms balanced, and maximum input is 6.0 V balanced. Voltage gain is 35 dB. Frequency response is 1 Hz - 200 kHz (-3 dB), THD is below 0.01% and signal-to-noise ratio is above 106 dB (A-weighted, ref. 200 W into 4 ohms). Crosstalk is above 100 dB between channels and above 90 dB between inputs (1 kHz). Dimensions are 440 x 135 x 360 mm (W x H x D, including feet), and weight is 20.0 kg. Consumption is 75 W at idle, 1000 W maximum at full power and 1.0 W in standby. Lindemann measured these values at 22 °C on a 230 V supply with an Audio Precision AP2522 analyser.

Engineering and use context

As a fully balanced amplifier, the 885 must never have the black speaker terminal connected to ground, and the manual warns that this damages the power amplifier. Each output is a pair of terminal posts for spades or 4 mm plugs. On the rear panel there are also a volume-controlled balanced XLR line output, a SYSCOM socket (RJ-45) and an IEC power inlet.

Volume covers 100 dB in 1 dB steps, balance is adjustable by ±5 dB, and channel balance is within 0.05 dB. A speed-controlled fan provides active cooling. It switches on according to ambient temperature and how hard the amplifier is driven. Protection circuits shut the amplifier down with an error message on over-temperature, DC voltage at the output or insufficient supply voltage. At turn-on an inrush current limiter protects the components. Mains voltage is 100, 120 or 230 V at 50 - 60 Hz, factory-set for the destination country.

Pairing

The XLR output is factory-set for power amplifiers with 26 dB gain, and the matching models are the Lindemann 852 and 855, for bi-amping or a second room. SYSCOM links the 885 with other 800 Series power amplifiers and CD/SACD players for central switch-on.

Alternatives

The Lindemann 882 is another stereo integrated amplifier from the same company.

Spezifikationen

  • Modellbezeichnung

    885

  • Typ

    Integrated Amplifier

  • Analogeingänge (symmetrisch)

    2

  • Analogeingänge (unsymmetrisch)

    3

  • Eingangsempfindlichkeit (mV)

    500

  • Eingangsimpedanz (symmetrisch) (Ω)

    20 000

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    20 000

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • D/A-Wandlung

    Ja

  • Phono MM/MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    N/A

  • Ausgangsleistung (8Ω) (W)

    140

  • Ausgangsleistung (4Ω) (W)

    260

  • Verstärkung (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    1

  • Obere Grenzfrequenz +/- 3dB (Hz)

    200 000

  • Signal-Rausch-Abstand (dB)

    >106 dB(A)

  • Klirrfaktor + Rauschen (%)

    <0.01

  • Dämpfungsfaktor

    N/A

  • Abmessungen (mm)

    440 x 135 x 360

  • Gewicht (kg)

    20

  • Offizieller Link