Hifiverse

Vollverstärker - Boulder 866

Beschreibung, Bilder, technische Daten und Spezifikationen

Boulder 866
Bildquelle - (c) Boulder

The 866 is a stereo integrated amplifier from Boulder Amplifiers of Louisville, Colorado, and the successor to the 865. Boulder lists higher power, more efficient manufacturing, reduced weight, greater current output at maximum power and added external IP control as the changes from the older model. Two versions are offered - all-analogue and analogue plus digital - and an analogue 866 can be upgraded to the digital version at the factory.

Key specs that matter

Continuous power is 200 W per channel into 8 ohms and 400 W into 4 ohms. Peak power is 250 W into 8 ohms, 400 W into 4 ohms and 700 W into 2 ohms, 100 W more peak power than the 865. Inputs are three pairs of balanced 3-pin XLR at 100 kohm, and maximum analogue gain is 40.4 dB. THD is 0.01%, and equivalent input noise is 2 µV at 20 kHz. Frequency response is +0.00/-0.04 dB from 20 Hz to 20 kHz, with -3 dB points at 0.015 Hz and 150 kHz. Its volume range is 100 dB in 1.0 dB steps (±0.01 dB). Mains options are 100, 120 or 240 V at 50-60 Hz, configured per country, and consumption is 1000 W maximum. The case is 440 x 390 x 190 mm (W x D x H) and weighs 24.5 kg.

Engineering and use context

Inside, a balanced, differential input circuit is followed by gain and output sections designed for high current delivery. New protection circuitry gives greater current output at maximum power, and its fast response guards against shorted cables or speakers. Boulder also uses new signal path and grounding techniques to lower residual background noise.

On the digital version, inputs are Ethernet, four USB host ports for memory sticks or self-powered drives, AES3 adaptable to S/PDIF, Toslink and Wi-Fi, with AirPlay and Roon endpoint support. Incoming data is asynchronously converted if necessary, then up- and oversampled in Boulder's own software and DSP before the DAC chips. A full-colour touch screen shows inputs, setup and amplifier status, and the Boulder Controller app allows custom setup, including photos of the sources. An RF remote is optional, with its receiver in a USB host port. Every chassis panel is milled from solid aluminium plate on Boulder's CNC machines, hand sanded and satin finished, and all text is engraved.

Pairing

Sources with balanced XLR outputs are required. Speaker cables connect to 6 mm thumbscrew binding posts. A subwoofer with a speaker-level input can be connected.

Alternatives

Boulder lists no other integrated amplifier in its current range.

Spezifikationen

  • Modellbezeichnung

    866

  • Typ

    Integrated Amplifier

  • Analogeingänge (symmetrisch)

    3

  • Analogeingänge (unsymmetrisch)

    N/A

  • Eingangsempfindlichkeit (mV)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    100 000

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • D/A-Wandlung

    Ja

  • Phono MM/MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    N/A

  • Ausgangsleistung (8Ω) (W)

    200 (Continuous); 250 (Peak)

  • Ausgangsleistung (4Ω) (W)

    400

  • Verstärkung (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    0.015

  • Obere Grenzfrequenz +/- 3dB (Hz)

    150 000

  • Signal-Rausch-Abstand (dB)

    N/A

  • Klirrfaktor + Rauschen (%)

    0.01

  • Dämpfungsfaktor

    N/A

  • Abmessungen (mm)

    440 x 390 x 190

  • Gewicht (kg)

    24.5

  • Offizieller Link